Page 1 of 3

1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:12 am
by Thomas_M
Thanks to our good friend Adam (Ads) we agreed upon to share his review on our forum. Adam already has published this review on his great review site
The Modelling News.

Let´s see what he thinks about Zoukei-mura´s newest kit:

Review Zoukei-Mura’s new P-51K/ Mustang IV in 32nd scale

Image

In the race to market one of the most popular WWII fighters ever the British version of the Mustang – the MK IV (P-51K) has been overlooked in 32nd scale – until now that is - as Zoukei-mura takes the mantle with their latest Mustang that can well wear stars and bars or roundels. We are building it but we thought we would give you a look at what is inside the box before we do…

Mustang IV (UK), P-51D (Early Type) & P-51K (USA)
Manufacturer: Zoukei-Mura
Scale: 1/32nd
Kit No: 32009 / SWS09
Styrene Parts: 292
Decals for four different aircraft (Mustang IV x 2 types, P-51 D Early Type x 1, P-51 K x 1)
Around $99(USD)/ 9,500yen - directly from Zoukei-mura´s website or their distributors

Image

I think it is rather fitting for Zoukei-Mura to so prominently promote the RAF aircraft on the front this kit of the P-51K/ Mustang IV with dynamic boxart complete with British roundels and sharkmouth gnashing as she climbs skywards. The British and her commonwealth allies did use the Mustang during the war in great numbers (the RF being the first user of the Mustang) and I suppose it was the use of the British Merlin engine combined with the laminar flow wings and streamlined fuselage designed in the US that made the Mustang into arguably the best fighter of the war.

Re: 1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:15 am
by Thomas_M
Image

It makes complete sense as well to kit this model – essentially an early mustang – in 32nd scale. In the wholly grail of modelling subjects it would be in a close tie with the Bf-109 and Spitfire. Everything else comes in a distant fourth after these three in popularity stakes, so it was more bad luck than anything else that the “Ultimate Mustang” in 32nd scale came out last year from two different suppliers. Tamiya beat Zoukei-mura to the punch in release dates but there are things that this kit offers that the Tamiya kit just does not.

This model reflects and early P-51D from the Dallas plant in Texas. The assembly line in Dallas was set up when the production in Inglewood California became overstretched. Rightfully so everyone was screaming out for this new long range fighter so more lines were opened up and we have the main difference in the P-51D and the K version – where it was made.

Image

The Dallas plant P-51K‘s were called the Mustang IVa in RAF and Commonwealth service (the P-51D being the Mustang IV) and the other difference that is apparent is the use of an un-cuffed AeroProducts propeller after the shortage of the Hamilton Standard propellers came to light. The other main difference being the inclusion of the bulged “Dallas” blown hood. (Both canopies came from the same manufacturer and were interchanged in the field all the time so check your references)

Image

So this is what we have to review today. Basically the early bubble canopy Mustang made in Dallas and used in fair amounts by the RAF and her commonwealth allies. Sure to be popular with a lot of modellers this kit is supplied with the earlier mustang options of a runner (sprue) of the earlier un-filleted tail as well as the later tail with a fillet. There are the choices of two different gun sights and three canopy shapes as well as two propeller choices, also there are three different choices of chin vent panel to cover nearly every mustang you could think of. So that is what is in the kit – pretty comprehensive really you could build just about any P-51D/K/ IV you want from this box – it all sounds promising. Let’s look a little closer to see what lies in the details of this kit.

Re: 1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:19 am
by Thomas_M
What’s inside..

On opening the kit you find a full box of sprues and notably a large packet with 1940’s vintage style instructions, three full sheets of decals and a canopy mask. Let’s look at them in turn in more depth..

Instructions:

Zoukei-mura do make very good instructions. In following with what I perceive to be their philosophy of making the aircraft just like the real thing they have replicated the cover of the Mustang’s pilot’s manual. All the way through the instructions there are plainly laid out sections showing you how to build each section of the aircraft. This modular way of building the kit is just like pictures of the real thing on the assembly line and it so fits in with the feel that modellers crave for. I mean that is why we all build models – to remember our childhood fantasies.

Image

The instructions are a mix of the earlier guide of the “D” model and an addendum booklet concerning the fitting of propellers, canopies, air filter placement and tail on the Mustangs chosen in this boxing. At first thumbing through I thought I was getting the “D” boxing markings as well, but this is just the instructions. The Mustang K/IV markings are at the back of the small booklet.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Re: 1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:23 am
by Thomas_M
I own the second SWS kit the Ta-152 from Zoukei-mura. It was a little soft in some detail and there were the black/silver and grey sprues which I can say has been rectified with this release. All grey sprues and some sharper detail could quell some of the “toy-like” comparisons hung on ZM in the past. I see a marked improvement in the quality of the moulding from the first kit of theirs i owned.

I have heard some say there is no flash at all on this kit – well they must need glasses, as there is indeed some flash on the kit. Nothing horrific that can’t be removed with a scrape from a curved blade. Some of the piping from the engine in particular will need a trim as it looks a third thicker “au natural”. There are some small sink marks and ejector push pin marks but they are thankfully not on the “Show” side where people will see them which is a real relief. Another facet of modern injection moulding is plenty of injection nodes on some parts, though this isn’t more than a minor inconvenience.

It’s pretty hard to do a good job on a kit that has as one of its options a "skeletal" frame - to show the aircraft without skin. To be honest you will not get a kit with framework so thin using injection moulding in complete accuracy. Maybe it is achievable with photo etch – but that I think is a whole different market. Most aircraft modellers do not like too much P/E so I get the feeling from a lot of people out there that this is considered a bit of a gimmick. HOWEVER it would be a great option with a clear skinned aircraft which could sell a few for them. I think ZM do a pretty god job of trying to bring their "inside-out" version of this model kit to life.

Another feature of this kit is the fine rivet work on the skin surface. Rivets are of a varying depth and shallow in places and deeper in others - the wings are represented as puttied and painted factory fresh wings sanded smooth which should please some and dismay others - more on that later.

Canopies/ clear parts

Image

Image

Image

There are three canopies included in this release. The canopies are very clear and as thin as they could be. There is a thin seam line down the centre of the canopy which will require some gentle sanding off. It must be impossible to get rid of – as other companies seem to not have this problem. Both this and the Tamiya kit have the same seam line in the same place.

Image

Image

A line drawing of the difference between the two plant's canopies:

Image

Image

The Inglewood early canopy:
Image

…and later (only slightly changed):
Image

...as well as the blown “Dallas” hood..
Image

You can see that the two Inglewood canopies are very similar – only an unintentional shape change occurred somewhere in the construction process. The Dallas hood however was slightly wider in the top and had a lip on the rear which made it look a little bulged. This was actually appreciated by pilots for a slightly improved all round vision. Check your references or the instruction sheet included to work out exactly which bird you have and which canopy applies.

There are other parts on the clear sprue – the instrument panel for you to stick the decals behind and paint the bezels (that old trick) and the K-14 and N-9 gun sights, along with formation lights for the underside wing are provided.


Canopy Mask
It is great to have a ready to go vinyl canopy mask in this set – a shame there are three slightly different canopies to mask with different shapes!

Image

Do not fret though brave modeller – get your tape, Maskol or some such masking agent out and fill in that small gap!

Re: 1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:25 am
by Thomas_M
The bonus “Runner”

The sprue – called runner by ZM has the extra parts (along with the Dallas hood and radio antennas on the tail) to truly make this a “K” or Mustang IV. Included in this are the AeroProducts hollow metal props and spinner hub along with the early type tail with no fillet on the spine.

Image

Also included are the partially shrouded air filter covers for the front panels of the engine.
We have the Aero prop joined to the runner at the prop blade rather than the root of the spinner which I suppose helped them mould it but made the removal undamaged easier.

Image

This picture shows the early tail with no fillet – the fuselage part that it joins to is included as well

Image

Image

A close up of the AeroProducts spinner. Notice the lightening holes represented here in the spinner bottom – nothing is left out!

Image

Re: 1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:27 am
by Thomas_M
Sprue A

Sprue A contains the .50calibre machine guns, the fuel tanks (wing and auxiliary and the radio stand) and the Hamilton Standard propeller.

Image

The auxiliary tank features gently sloping sides that slightly widen on the vertical edges and the wing-tip tanks are here in full as well – meaning you can (of course) expose them in a workshop or the “skeletal” diorama.

Image

And the real things:

Image

The ANM2 .50 calibre guns – six in all/ three in each wing - are represented very nicely here with slightly perforated barrel jackets as well as a recessed muzzle hole. The inner gun on each also has a flash suppressor.

Image

Image

The ammo for the machine guns is included here as well - thankfully it is not floppy rubber like the Dragon versions were – eesh! Again this and the full guns along with the skeletal wings provide you a full re-armament diorama if that is what you like.

Image

You can see that the folded ammo poking out in the bullet ends – it will look great under some brass paint and a wash.

The four bladed constant speed propeller – more on this later in the review when we compare the two on offer – but you will notice that ZM moulded the connections to the sprue at the propeller root so as to not have the removal run the hub like some other kits have.

Image

Re: 1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:31 am
by Thomas_M
Propellers

Included in this kit are two choices of propeller – both of which suit the P-51D/K and Mustang IV in service life as both were commonly interchanged in the field. The real change between D and K version is that the Dallas produced aircraft used the four bladed AeroProducts four bladed propeller and the Inglewood plant used the Hamilton Standard prop. This was used as there was a marked shortage of the four bladed Hamilton Standard, four-blade.

Both are supplied here – and as you can see by this picture:

Image

The AeroProducts prop was not cuffed at the root and it was tapered toward the end and it was narrower in the chord. – You can see the three props used by mustangs in these line drawings…

Image

And side profiles of both – the Hamilton Standard has the spinner on it.

Image

Aero Products spinner & props

Image

Hamilton standard cuffed

Image

Re: 1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:34 am
by Thomas_M
Sprue B

The Packard Merlin V-1650 piston inline engine and supercharger dominates this sprue, also included are the main and tail wheel tyres and the piping and plumbing for the engine. Over thirty parts just for the block and supercharger without all the extras make this a pretty detailed powerplant.

Image

The diamond tread pattern was fairly common as was the thick and heavily detailed read landing wheel pictures here - I might thin the detail just a little on the rear tyre a little. These tyres sure beat the rubber Dragon and Tamiya Tyres!

Image

Image

Image

The plumbing for the engine could do with being a little thinner – I will definitely run the knife along the edge of these to make them a bit more scale realistic.

Image

The block of the engine is shown here along with the supercharger on the right. You can see the piston rods hanging out from the bottom of the block?

Image

That is because there are pistons (and rings) moulded into the inside of the block – very nice but it is a shame you can’t see them once it is together – a shame we don’t have a clear engine.

Image

Re: 1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:39 am
by Thomas_M
Sprue C

Sprue C contains the pilot’s seat – cockpit enclosure and instrument panel along with the landing gear and wheels, the radiator and middle assembly, CO2 bottles and the exhaust shrouds and the hollow pipes themselves. Several other parts including the firewall, wing root spar and other little detail populate this sheet

Image

Left and right cockpit walls – these could do with some wires maybe but not much more. Maybe some Barracuda placards and a nice paint job and your work is made easy. You can see what I mean here about plenty of injection nodes on some parts.

Left cockpit wall
Image

Image

Right side
Image

Image

The instrument panel is next – it is here in a rather thickly moulded plastic part that I suppose will hold a fair bit of glazing with something like future and it will capture the paint off a dry brush pretty easily.

The IP…
Image

I like the replication of this panel – although the detail is a little deep this works in this cockpit. You can very faintly make out the ANA barge on the rudder pedals and the switches on the bomb release panel (part 33).

Image

Image

It is nice to see at the back the exposed dials and some wiring as well if you want to somehow expose this.

Image

Image

The opened out exhaust holes are pretty nicely done. There is a welded seam just like the original here as well – I like a kit that gets this right as it is always somewhere people look at.

Image

Image

The 10-spoked steel wheels for the mustang are portrayed pretty well for injection moulded plastic.

Image

Each side is hollowed out to give the correct feel to each wheel – combined with the nice tyres these are pretty nice.

Image

Image

The wing spar holds the wings at the right dihedral and stiffens the airframe once attached – it does more than pay lip service like some other kits – it actually looks like the real thing.

Image

The main landing gear is seen here in the weighted position the same as they would be on the deck. There is a slight gap too much maybe 1 mm or so in the oleo but I can live with that.

Image

Image

The seats have a choice of simply padded backrest or with moulded in seat harnesses. The moulded on versions are normally a nightmare but they do save you on sourcing your own seatbelts. This version isn’t that bad. The rear of the seat has the same framing as well.

Image

Image

Image

Image

Re: 1/32 P-51D/K Mustang IV by Zoukei-mura

Posted: Sat Apr 19, 2014 9:42 am
by Thomas_M
Sprue D

Mainly the structure under the skin of the aircraft – this sprue holds the skeletal wing frame and the front underside of the nose along with the engine bearers and oil tank, horseshoe shaped coolant tank, radiator and internal carburettor air induction structure. This sprue also houses the tail-wheel.

Image

Firstly the wide wing structure – this skeleton frame encompasses not only the fuel tanks but the six fifty cals and their ammo. Although some might scoff at this ultra-realism I suppose it means you can model in a different way. I am sure that you could model this with all the internals exposed – or you could show just some panels, fuel tanks or you could close it all up.

Image

Image

At least with this kit you get every option. That is one significant leg up on any other Mustang kit on the market except for maybe the clear “phantom Mustang” released by Revell USA all those years ago that people still talk about. I would not be surprised if that kit was an inspiration for ZM’s ethos.

Image

Image

A bit of flash on these forward underside panels of the engine. Once removed it will surround the air carburettor structure which is also on this sprue.

Image

The myriad of oil and fluid plumbing to the engine is a site to behold and most impressively moulded

Image

The CO2 tanks and radiator are finely moulded here - no need for mesh replacements on this radiator!

Image

The carby and the oil tank are here, and the detail on the oil tank is maybe a little thick for some people’s tastes – so just sand it down a little. All of this detail will look great with a weathering wash.

Image

Here is the real thing being assembled onto the firewall back in the 40’s – you can see the thick detail on these tanks is there in real life.

Image

And the rear tail wheel in plastic complete with many injection nodes and a plan from the manual of the real thing...

Image

Image