Page 3 of 6
Re: MiniCraft 1/48 X5F-1
Posted: Mon Feb 08, 2016 9:41 am
by LyleW
Got some "yaller" (yellow for you non-Southerners) on this. I'll likely rub it down a bit with 0000 steel wool (a no-no in some circles) and hit it again.
This wasn't to my liking, so I sanded it out, hit it with white primer and will try again.
Oh, I also used Model Master Acrylic.....
Re: MiniCraft 1/48 X5F-1
Posted: Mon Feb 08, 2016 6:58 pm
by BlackSheep214
I thought it was pronounced "yeller"? LOL!
Re: MiniCraft 1/48 X5F-1
Posted: Tue Feb 09, 2016 7:50 am
by LyleW
BlackSheep214 wrote:I thought it was pronounced "yeller"? LOL!
Regional variation!
Re: MiniCraft 1/48 X5F-1
Posted: Tue Feb 09, 2016 8:15 am
by Stuart
Another fine looking build Lyle - you've got over the hiccup with the nacelles in short order.
Re: MiniCraft 1/48 X5F-1
Posted: Tue Feb 09, 2016 8:23 am
by LyleW
portman wrote:Another fine looking build Lyle - you've got over the hiccup with the nacelles in short order.
Thanks, Stuart. I guess this is one time the Minicraft plastic worked in my favor. Trying to get it ready for a coat of black...then silver.
Re: MiniCraft 1/48 X5F-1
Posted: Tue Feb 09, 2016 2:47 pm
by Thomas_M
The yaller picture gives a good impression of how large those radials have been in comparison to the slim fuselage!
(Yaller? Really?? I would need half of bottle of Yukon Jack for this... )
Re: MiniCraft 1/48 X5F-1
Posted: Wed Feb 10, 2016 8:50 am
by LyleW
Thomas_M wrote:The yaller picture gives a good impression of how large those radials have been in comparison to the slim fuselage!
(Yaller? Really?? I would need half of bottle of Yukon Jack for this... )
Yep, those are two BIG holes in the front of this thing. Put the black on yesterday morning, used Rust-oleum gloss black enamel. Took a full 24 hours or so to dry enough. Today? we do silver. Question is, Alclad Aircraft Aluminum or rattle can metallic?
Re: MiniCraft 1/48 X5F-1
Posted: Wed Feb 10, 2016 10:51 am
by LyleW
sigh. lack of patience. fingerprints. bad eyes - now having to remask and try to touch up. ....priceless.
This is the Alclad Aircraft Aluminum. May go back with just the Alclad Aluminum.
Re: MiniCraft 1/48 X5F-1
Posted: Wed Feb 10, 2016 1:09 pm
by Thomas_M
What has happened, Lyle? Maybe the gloss wasn´t fully dried up?
Re: MiniCraft 1/48 X5F-1
Posted: Wed Feb 10, 2016 1:26 pm
by LyleW
Thomas_M wrote:What has happened, Lyle? Maybe the gloss wasn´t fully dried up?
I don't know. Seemed dry. Anyway, we will try again.