Monogram 1/48 Bell P-39L-1 Airacobra

Post your completed aircraft here.
User avatar
Gary Brantley
Elite Member
Posts: 2735
Joined: Tue Apr 08, 2014 9:40 pm
Location: Cameron, Texas

Monogram 1/48 Bell P-39L-1 Airacobra

Post by Gary Brantley »

I thought this had been posted here, but a search of my posts says otherwise. This is an older build that I finally got around to photographing last summer. I took it and several other models to another small-town airport, the Coffield Regional Airport in Rockdale, Texas, about 20 miles away. The airport used to belong to a local millionaire and he had lot’s of cool WWII planes out there, including B-25s and C-47s. I thought the old hangar had a cool, “classic” look to it and used it for a background.

The model’s first release date, according to the instructions, was 1969, then 1983 and ’89. It must’ve really been somewhat “state of the art” in 1969 with lot’s of cool detail and features. I added a little bit of wiring/tubing and tried my hand at dirtying up the landing gear and belly. It is done in Soviet Air Force markings and colors and represents one of over 4,000 Airacobras turned over to the Russians on Lean-Lease terms during World War II.

As to comments from some that it might be just too clean for the Russian Front, there’s this:


“Too clean?

Da, IS clean. Clean due to heroic efforts of Sgt. Alexei Nadgudunov, crew chief. Sgt. Nadgudunov was awarded Hero of Soviet Union medal for his efforts to maintain aircraft even in most-forward positions on front against German fascists in Great Patriotic War!

Wielding high-pressure water spray, Nadgudunov beat back worst conditions that Mother Russia could provide. Sgt. Nadgudunov stated that even in harsh circumstances of combat, Soviet aircraft could go to war in presentable condition! VVS General Dimitri Klekov said Sgt. Alexei Nadgudunov exemplified efforts of patriotic Russian comrade citizens and soldiers in war against the fascist invaders.”

Hopefully, it turned out to be a fair “four-footer”. Thanks for taking a look, and all comments welcomed!

Gary


Image

Image

battle damage:

Image

Image

Image

Image

Image

Image

Image

Image

Belly shot

Image

Image

Image

Image
Last edited by Gary Brantley on Fri Sep 11, 2015 7:25 pm, edited 1 time in total.
User avatar
Stuart
Elite Member
Posts: 11887
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales

Re: Monogram 1/48 Bell P-39L-1 Airacobra

Post by Stuart »

That's very nice - I had this kit once but never finished it. you did well to get all of the panels open yet still have it sitting on it's nose - whare did you find the space for all the weight?

Great build Tex - it looks great!
Stuart Templeton 'I may not be good but I'm slow...'
User avatar
BlackSheep214
Elite Member
Posts: 13409
Joined: Sun Apr 06, 2014 8:47 pm

Re: Monogram 1/48 Bell P-39L-1 Airacobra

Post by BlackSheep214 »

I love the Airacobra! I did one years and years ago in camo scheme - hand painted of course. LOL!
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
Medicman71
Elite Member
Posts: 11295
Joined: Mon Apr 07, 2014 9:32 am
Location: Houston, Tx

Re: Monogram 1/48 Bell P-39L-1 Airacobra

Post by Medicman71 »

Very nice work!! :shoutout: :shoutout:
Mike

Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
User avatar
Gary Brantley
Elite Member
Posts: 2735
Joined: Tue Apr 08, 2014 9:40 pm
Location: Cameron, Texas

Re: Monogram 1/48 Bell P-39L-1 Airacobra

Post by Gary Brantley »

Thanks gents! Stuart, if I recall correctly, I packed the area above the front gear bay and behind the prop spinner with a mixture of 2-part epoxy and lead shot. That "technique" works well on aircraft like this. It must have been a delicate balance because if you look at this P-39 wrong, it'll flop back on it's tail. :wink:

On modern jets, I usually epoxy a spent pistol or rifle bullet into the nose cone. They seem made for the task.

Thanks again for the kind words everyone. I'm glad you liked her!
Gary
User avatar
Stikpusher
Moderator
Posts: 21179
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: Monogram 1/48 Bell P-39L-1 Airacobra

Post by Stikpusher »

:beau: More beautiful work and photos from you Tex! And on such a classic of a kit :shoutout:
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Gary Brantley
Elite Member
Posts: 2735
Joined: Tue Apr 08, 2014 9:40 pm
Location: Cameron, Texas

Re: Monogram 1/48 Bell P-39L-1 Airacobra

Post by Gary Brantley »

Stikpusher wrote::beau: More beautiful work and photos from you Tex! And on such a classic of a kit :shoutout:
Thank you sir! That old kit really is a classic. On another modeling forum, Tom Cleaver commented that he was the first modeler in the San Francisco area to buy the kit back in '69. He said that it was indeed thought of as "state of the art" back then. It's still not bad I'd say, and represents the Airacobra quite well. Your kind words are, as always, much appreciated Carlos! :grin:
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: Monogram 1/48 Bell P-39L-1 Airacobra

Post by KSaarni »

Very, very nice Airacobra Tex !

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
Gary Brantley
Elite Member
Posts: 2735
Joined: Tue Apr 08, 2014 9:40 pm
Location: Cameron, Texas

Re: Monogram 1/48 Bell P-39L-1 Airacobra

Post by Gary Brantley »

KSaarni wrote:Very, very nice Airacobra Tex !

- Kari
Thanks Kari! It's so nice of you to say that, and great to know that you like that old bird!!
Much appreciated my friend.
:grin:
Post Reply

Return to “Completed Builds”