Kari's bench 2021 -->
Re: Kari's bench 2021 -->
Thanks Paul !
Finally the horizontal stabiliser has been painted. It's always exciting, the moment before the first masking tape strip is removed..
I'm pretty ok with the result.
Some minor touch ups here and there is still needed + then oil wash and some weathering as well
- Kari
Finally the horizontal stabiliser has been painted. It's always exciting, the moment before the first masking tape strip is removed..
I'm pretty ok with the result.
Some minor touch ups here and there is still needed + then oil wash and some weathering as well
- Kari
---
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
- speedgraflex
- Moderator
- Posts: 9759
- Joined: Fri Feb 10, 2017 11:08 pm
- Location: Santa Monica, California
Re: Kari's bench 2021 -->
Masking edges look good. There’s a slight issue at one corner, but sincerely fantastic work!
Bruce / SPEEDGRAFLEX
Re: Kari's bench 2021 -->
Thanks Bruce,speedgraflex wrote:Masking edges look good. There’s a slight issue at one corner, but sincerely fantastic work!
Yes, needs still some touch ups in the corners, as a matter of fact on both.
Thanks John!jeaton01 wrote:Nice!
- Kari
---
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
Re: Kari's bench 2021 -->
I feel like I am in a candy store, just pick and choose a suitable stage of the build..
So next in the build process, the nozzles.
The instructions do not promise a pain free process, 7 pieces in total / nozzle
So far almost every parts sprue gates have been ingeniously located, when it comes to the nozzle parts, here they were more "back to reality". Not bad, but needed some sanding to get the pieces to fit just perfectly.
But when this was achieved, the entire nozzle, with 7 pieces was sturdy as a bronze statue!
To secure the construction, only some drops of Tamiyas Extra Thin was needed in strategic places.
This kit keeps getting better and better all the time!
- Kari
So next in the build process, the nozzles.
The instructions do not promise a pain free process, 7 pieces in total / nozzle
So far almost every parts sprue gates have been ingeniously located, when it comes to the nozzle parts, here they were more "back to reality". Not bad, but needed some sanding to get the pieces to fit just perfectly.
But when this was achieved, the entire nozzle, with 7 pieces was sturdy as a bronze statue!
To secure the construction, only some drops of Tamiyas Extra Thin was needed in strategic places.
This kit keeps getting better and better all the time!
- Kari
---
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
Re: Kari's bench 2021 -->
That is some fantastic detail. Tamiya did a good job on the spruegates
March as one, Don't look back
Odin's sons... Attack!
Unleash hell! Do not repent! Warfare grants us no lament
Let your weapons slash and tear This is no place for fear
Hold the lines! Move as one! In unity our victory's won
Our shields will form a mighty wall
United we shall never fall
Odin's sons... Attack!
Unleash hell! Do not repent! Warfare grants us no lament
Let your weapons slash and tear This is no place for fear
Hold the lines! Move as one! In unity our victory's won
Our shields will form a mighty wall
United we shall never fall
Re: Kari's bench 2021 -->
Thanks Clint !
"Packing down" the project for a few days into the paintbooth.
I'm going on a worktrip to Germany tomorrow andwill stay on the road until Thursday.
I just need to keep the Mojo alive!
- Kari
"Packing down" the project for a few days into the paintbooth.
I'm going on a worktrip to Germany tomorrow andwill stay on the road until Thursday.
I just need to keep the Mojo alive!
- Kari
---
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
- tempestjohnny
- Elite Member
- Posts: 3369
- Joined: Sat Oct 15, 2016 4:51 am
- Location: Naples. FL
Re: Kari's bench 2021 -->
I don't think I would have trouble keeping the MOJO alive with that kit
Re: Kari's bench 2021 -->
that's what I think also!tempestjohnny wrote:I don't think I would have trouble keeping the MOJO alive with that kit
- Kari
---
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/