1:48 Tamiya Corsair
-
BlackSheep214
- Elite Member
- Posts: 13419
- Joined: Sun Apr 06, 2014 8:47 pm
Re: 1:48 Tamiya Corsair
Kenny got new toys!
“Who controls the skies, controls the fate of this Earth”
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
Re: 1:48 Tamiya Corsair
"Mamma and Pappa were lying in bed... Mamma rolled over, this is what she said..."
"I'll Give you some... I'll Give you some.. PE...PE.... It's good for you... It's good for..."
Stuart Templeton 'I may not be good but I'm slow...'
Re: 1:48 Tamiya Corsair
YESSIR I DID GAAAAAAAH!!!! I’be Been checking my mailbox every day!
Also, Full-Metal Jacket is one of my favorite movies of all time!
I get crazy waiting for parts to arrive, oh man. I’m so happy I can commence work on this thing!
Also, Full-Metal Jacket is one of my favorite movies of all time!
I get crazy waiting for parts to arrive, oh man. I’m so happy I can commence work on this thing!
Kenny X
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
Re: 1:48 Tamiya Corsair
Suwheet! I LOVE getting aftermarket stuff in the mail!
That should add lots of detail to your Corsair build. The ignition wire harness is fiddly but in my experience, it should fit pretty well. Just have to be careful. I usually secure the ring to the engine first and then bend each wire individually to the appropriate cylinder head. Also, if you want to reduce the flatness of the wire, brush painting prior to installation helps give the wires some roundness.
That should add lots of detail to your Corsair build. The ignition wire harness is fiddly but in my experience, it should fit pretty well. Just have to be careful. I usually secure the ring to the engine first and then bend each wire individually to the appropriate cylinder head. Also, if you want to reduce the flatness of the wire, brush painting prior to installation helps give the wires some roundness.
John aka JKim
-----------<><
-----------<><
Re: 1:48 Tamiya Corsair
I am not a happy guy right now. After waiting for several weeks for my PE stuff to arrive so that could resume this build, I’m having a problem with the IP.
I wanted to get started, and the instructions call for you to place a film between the PE face, and the kit part. Well, here’s the film:
...it appears to just be a panel printed on a piece of paper. I thought perhaps it was a thin film on backing, but I was wrong there. It’s just sorta printed on there. And it looks terrible, too.
“No problem, I’ll just use the Tamiya IP decals and place the PE faces over them.” I thought.
No dice. They don’t match up.
I’m not foolin’ with this IP B.S. on this kit anymore. I’m hella disappointed after waiting so long for these parts to arrive. And in preparation, I’d already sanded the kit part down to accommodate the PE set...
So I ordered a Corsair IP from Yaho models vi eBay:
It is much nicer. But it won’t be here until the end of the month at best.
What a pain, not to mention a total enthusiasm drainer. Obviously I need to manage my expectations better. However, this aircraft in particular is once again giving me a headache (what am I, cursed when it comes to Corsairs?).... So I am going to leave it alone for now until my new IP from Yahu gets here. In the meantime I’m going to finish my tank, and maybe I’ll even start on my Mustang. I know I made a rule about that, but whatever.
I wanted to get started, and the instructions call for you to place a film between the PE face, and the kit part. Well, here’s the film:
...it appears to just be a panel printed on a piece of paper. I thought perhaps it was a thin film on backing, but I was wrong there. It’s just sorta printed on there. And it looks terrible, too.
“No problem, I’ll just use the Tamiya IP decals and place the PE faces over them.” I thought.
No dice. They don’t match up.
I’m not foolin’ with this IP B.S. on this kit anymore. I’m hella disappointed after waiting so long for these parts to arrive. And in preparation, I’d already sanded the kit part down to accommodate the PE set...
So I ordered a Corsair IP from Yaho models vi eBay:
It is much nicer. But it won’t be here until the end of the month at best.
What a pain, not to mention a total enthusiasm drainer. Obviously I need to manage my expectations better. However, this aircraft in particular is once again giving me a headache (what am I, cursed when it comes to Corsairs?).... So I am going to leave it alone for now until my new IP from Yahu gets here. In the meantime I’m going to finish my tank, and maybe I’ll even start on my Mustang. I know I made a rule about that, but whatever.
Last edited by KennyX on Tue Dec 04, 2018 8:50 pm, edited 2 times in total.
Kenny X
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
Re: 1:48 Tamiya Corsair
That ain't right! That SHOULD be a piece of clear acetate with the IP dials printed on it. It looks like you got a paper copy of the acetate.
I would contact the retailer and/or Eduard for replacement. Depending on the quality of the copy, you could xerox it onto a piece of clear overhead projector film.
I HATE it when you wait for something and then it comes broken, incomplete, wrong or otherwise unusable. On my last D-9 build, Eduard sent me two left flaps instead of one left and one right but they sent me a replacement fairly quickly.
I would contact the retailer and/or Eduard for replacement. Depending on the quality of the copy, you could xerox it onto a piece of clear overhead projector film.
I HATE it when you wait for something and then it comes broken, incomplete, wrong or otherwise unusable. On my last D-9 build, Eduard sent me two left flaps instead of one left and one right but they sent me a replacement fairly quickly.
John aka JKim
-----------<><
-----------<><
Re: 1:48 Tamiya Corsair
John,
The quality of it was very poor. No can do good copy
This is the first time Eduard dropped the ball on me, and I emailed them about it, yessir. Still, a replacement from them will take just as long, and I do like the looks of that Yahu IP.
I’m just pissed now because I’d mapped out a rough schedule for getting that cockpit done today-Friday and getting the fuselage joined and wings attached on Saturday.
ACK!
AH well, I can work on the engine and landing gear, at least. And I have that Emil that’s been waiting in the wings for a long time to keep my airplane building shakes at bay, too.
The quality of it was very poor. No can do good copy
This is the first time Eduard dropped the ball on me, and I emailed them about it, yessir. Still, a replacement from them will take just as long, and I do like the looks of that Yahu IP.I’m just pissed now because I’d mapped out a rough schedule for getting that cockpit done today-Friday and getting the fuselage joined and wings attached on Saturday.
ACK!
AH well, I can work on the engine and landing gear, at least. And I have that Emil that’s been waiting in the wings for a long time to keep my airplane building shakes at bay, too.
Kenny X
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
Re: 1:48 Tamiya Corsair
To change to Yahu was the right thing to do.
Eduards stuff is just light years behind Yahu..
Not even the new ”premium” Eduard Löök IP stuff beats Yahus...
Below Yahu versus Eduard ”Löök” I bought some time ago for Revells P-51D in 1/32.
I bought first the Eduard... got it and immediately ordered Yahus...
Which on is which one...
- Kari
Eduards stuff is just light years behind Yahu..
Not even the new ”premium” Eduard Löök IP stuff beats Yahus...
Below Yahu versus Eduard ”Löök” I bought some time ago for Revells P-51D in 1/32.
I bought first the Eduard... got it and immediately ordered Yahus...
Which on is which one...
- Kari
---
On the bench:
MiniArt 1:48 - Junkers F13 Float Plane
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
MiniArt 1:48 - Junkers F13 Float Plane
https://www.facebook.com/GrundAsk-Scale ... 721218708/
Re: 1:48 Tamiya Corsair
You know, Kari, now that I’ve had some time to cool off, listen to Dean Martin, work on the cockpit of that Battle of France Emil, and look at some shots of these Yahu IP,s, I am 100% inclined to agree with you. They look amazing. And I want this build to be amazing. And I’m gonna buy me one of these Yahu IP’s for my forthcoming Mustang too.
Kenny X
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
Head Mother Trucker In-Charge @ Kenny X’s Reichs Winzigkleines Flugzeugewerks *and now* Airboat Records, too!
-
speedgraflex
- Moderator
- Posts: 11358
- Joined: Fri Feb 10, 2017 11:08 pm
- Contact:
Re: 1:48 Tamiya Corsair
I agree with Kari, and have already used a Yahu IP in Cripes A-Mighty. In 1/32, a superior IP is the one offered by Barracuda Resin:
Make more models!