Page 3 of 11

Re: 1/72 Tamiya F-16

Posted: Tue Sep 22, 2015 8:50 pm
by Manny1943
Fermis wrote:Taking a bit of a different approach to this one.
Started with the gears/bays and associated parts (all just dry fit so far)

Image

Image

Image

One thing I really don't like is that the main gears are one piece, that will have to be glued in place before painting....making for a PITA mask job....BOOOOOOOO
Otherwise...so far, so good!
Thought you said this was 1/72nd scale... :bored:

Re: 1/72 Tamiya F-16

Posted: Wed Sep 23, 2015 8:49 am
by BlackSheep214
Fermis wrote: One thing I really don't like is that the main gears are one piece, that will have to be glued in place before painting....making for a PITA mask job....BOOOOOOOO
Otherwise...so far, so good!

Really? Good thing I was able to print out the instruction guide. I gotta check this out. I wonder why they tell you to do that?

Re: 1/72 Tamiya F-16

Posted: Wed Sep 23, 2015 11:33 am
by Manny1943
BlackSheep214 wrote:Really? Good thing I was able to print out the instruction guide. I gotta check this out. I wonder why they tell you to do that?

I have the same kit and I like the fact that it is in one piece for alignment and strength issues. :writing: I'm not sure you HAVE to glue it in place before painting though---do you? :Beaver:

Re: 1/72 Tamiya F-16

Posted: Wed Sep 23, 2015 5:24 pm
by Fermis
Manny1943 wrote:
BlackSheep214 wrote:Really? Good thing I was able to print out the instruction guide. I gotta check this out. I wonder why they tell you to do that?

I have the same kit and I like the fact that it is in one piece for alignment and strength issues. :writing: I'm not sure you HAVE to glue it in place before painting though---do you? :Beaver:

Yes...and no...

Image

Th center piece of the bay locks the "plate" (connection piece of main gears) into a recess...then a fuselage piece (in back ground) fills the void and goes over the bays center piece....this piece could be painted separately, but I'm not a big fan of doing such things. Another, better, option, would be to drill a pin hole, through the gear into the "plate", then slice the gear from the plate, then use a pin when attaching them later..... :hmm: ...that's a hell of an idea!!!

Re: 1/72 Tamiya F-16

Posted: Wed Sep 23, 2015 6:52 pm
by Manny1943
What's that blue box in the gear bay??? :Beaver:

Re: 1/72 Tamiya F-16

Posted: Wed Sep 23, 2015 7:05 pm
by frankc
Manny1943 wrote:What's that blue box in the gear bay??? :Beaver:
The battery. The blue ones were the originals installed at the aircraft plant. New maintenence-free ones are red in color and installed on all blocks.

Re: 1/72 Tamiya F-16

Posted: Wed Sep 23, 2015 7:19 pm
by Manny1943
frankc wrote:
Manny1943 wrote:What's that blue box in the gear bay??? :Beaver:
The battery. The blue ones were the originals installed at the aircraft plant. New maintenence-free ones are red in color and installed on all blocks.
I love your blue battery and want to jump it off... :blush:

Re: 1/72 Tamiya F-16

Posted: Thu Sep 24, 2015 8:22 am
by frankc
Some photos of the battery.

Image

Image

Image

Re: 1/72 Tamiya F-16

Posted: Thu Sep 24, 2015 8:58 am
by Manny1943
frankc wrote:Some photos of the battery.

image
So what you are saying is that Fermis screwed up on the color.... :hmm:

Re: 1/72 Tamiya F-16

Posted: Thu Sep 24, 2015 9:54 am
by CallSignOWL
That's a lot of money spent on such a little plane!!!! Did u get a super deal on that, cuz I'd want in on that action! :outtahere: