Re: Kari's bench 2021 -->
Posted: Thu Jun 29, 2023 7:39 pm
Man......that turned out SUPER Kari!! 
Thanks Joe! :-)
- Kari
Page 41 of 63
Re: Kari's bench 2021 -->
Posted: Sun Jul 02, 2023 12:53 am
Re: Kari's bench 2021 -->
Posted: Mon Jul 03, 2023 9:30 am
This thread was started long before I joined and I just saw it pop up so I started s 
crolling...
Very nice work on the P-51D. I have a few afx mustangs that are on my endless to build list...
crolling... Very nice work on the P-51D. I have a few afx mustangs that are on my endless to build list...
KSaarni wrote: ↑Tue Dec 28, 2021 10:27 am Finally my first finished model for 2021 is done!
No, it's not the Zero yet, but the 1/48 Airfix P-51D Mustang, that I started to build January 12th 2021, almost a year ago!
It was 95% ready for months and months and months.. And just stalled when those bits and pieces had to be done.
Next in line, the Zero !
- Kari
Re: Kari's bench 2021 -->
Posted: Thu Jul 06, 2023 12:54 am
Many thanks Chris, I enjoyed the Airfix P-51D more than I did with Eduards (which was never finished).
I had my challenges with the Airfix kit, but clearly not so serious ones, as I have forgot precisely what they were !
- Kari
Re: Kari's bench 2021 -->
Posted: Mon Dec 04, 2023 4:29 pm
I took the small Vought Kingfisher embryo on my bench and decided to be effective, by adding the main float into the fuselage
As it went easier than I thought, I decided to do one of the wing floats.. Quite fiddle pieces and the fit a little bit this and that..
But long live blu tac!
- Kari
As it went easier than I thought, I decided to do one of the wing floats.. Quite fiddle pieces and the fit a little bit this and that..
But long live blu tac!
- Kari
Re: Kari's bench 2021 -->
Posted: Tue Dec 05, 2023 8:50 am
looks to be coming along very well.
Re: Kari's bench 2021 -->
Posted: Tue Dec 05, 2023 9:01 am
Very cool Kari!
Re: Kari's bench 2021 -->
Posted: Tue Dec 05, 2023 11:43 am
Just one more wing float to go… 
Re: Kari's bench 2021 -->
Posted: Tue Dec 05, 2023 1:56 pm
Thanks Lyle, Mike and Carlos!
Both wing floats in place and preparations for painting has started by masking the canopy. I found a pretty easy and straight forward method to mask the individual canopy frames. Not only easy, but pretty fast as well
- Kari
Both wing floats in place and preparations for painting has started by masking the canopy. I found a pretty easy and straight forward method to mask the individual canopy frames. Not only easy, but pretty fast as well
- Kari
Re: Kari's bench 2021 -->
Posted: Wed Dec 06, 2023 8:34 am
grat looking masking work!