Page 1 of 6

Meng 1/35 French Main Battle Tank AMX-30B

Posted: Wed Apr 06, 2016 3:13 pm
by Jeeves
Image

Wanted to try something a bit more modern...thought this would be fun! Ordered the wrong Kagero volume- which just makes me want to go buy the B2 version ;) While I wait for the first volume to come instead- here is where I am at...


Image
Image

Re: Meng 1/35 French Main Battle Tank AMX-30B

Posted: Thu Apr 07, 2016 9:56 am
by Thomas_M
Yeah, that´s a start! :shoutout:
I cannot see any mould seams on the tyres; did you already sand them off?

Re: Meng 1/35 French Main Battle Tank AMX-30B

Posted: Thu Apr 07, 2016 1:37 pm
by Stikpusher
:popcorn:

Re: Meng 1/35 French Main Battle Tank AMX-30B

Posted: Thu Apr 07, 2016 2:57 pm
by Jeeves
Thomas_M wrote:Yeah, that´s a start! :shoutout:
I cannot see any mould seams on the tyres; did you already sand them off?
I don't believe there were any-- the only thing I sanded off were the burrs from the sprue attachment points...

Re: Meng 1/35 French Main Battle Tank AMX-30B

Posted: Thu Apr 07, 2016 11:44 pm
by Thomas_M
No mould lines? Cool! I hate sanding those. Especially on Panzer IV or later ones with zillions of wheels...

Re: Meng 1/35 French Main Battle Tank AMX-30B

Posted: Wed Jul 13, 2016 9:04 am
by Jeeves
Decided I'd paint a UAE scheme first...to use as a base. Since Bosnia inherited these from the UAE, I imagine they wouldn't be factory fresh-- thus the missing grill off of one of the exhausts. Not sure now if I want to put some hairspray down and then the NATO scheme and proceed that way or do salt or other form of chipping and make it more minimal. Any suggestions? Bosnia info on these tanks is nigh on nonexistent except to the Bosnians I suppose :(

Image
Image

Re: Meng 1/35 French Main Battle Tank AMX-30B

Posted: Wed Jul 13, 2016 10:36 am
by mostrich
You've made great progress, Mike. That's a mean looking tank - not that there are some friendly ones... :giggles:

You could go down the hairspray lane or dipping on some masking fluid with a sponge for larger and medium sized chips.
After the camo's applied you can add some further scratches with a sponge and/or a fine brush. I think the salty way is more rewarding on a single color scheme. The final weathering effects will kill most of it anyway.

Maybe some oil paint rendering could come out nicely on a NATO scheme. Michael Rinaldi mastered this technique and shared it not only in some impressive books but also in this how to:

Oil Paint Rendering the Rinaldi way

Re: Meng 1/35 French Main Battle Tank AMX-30B

Posted: Thu Jul 14, 2016 1:15 pm
by KSaarni
:popcorn:

- Kari

Re: Meng 1/35 French Main Battle Tank AMX-30B

Posted: Thu Jul 14, 2016 1:37 pm
by Stikpusher
Jeeves wrote:Decided I'd paint a UAE scheme first...to use as a base. Since Bosnia inherited these from the UAE, I imagine they wouldn't be factory fresh-- thus the missing grill off of one of the exhausts. Not sure now if I want to put some hairspray down and then the NATO scheme and proceed that way or do salt or other form of chipping and make it more minimal. Any suggestions? Bosnia info on these tanks is nigh on nonexistent except to the Bosnians I suppose :(

Image
Image
Well, it appears that they were delivered in their desert scheme. Which would only be somewhat effective in the southernmost regions of the country between Mostar and the Adriatic coast.

Image

And yes, from personal experience of my time there, I can tell you that once Bosnia was out of the headlines in 96 or so and again in 99 during the Kosovo war, nobody has much interest in that place. Unless you are there or have been there.

Re: Meng 1/35 French Main Battle Tank AMX-30B

Posted: Thu Jul 14, 2016 1:45 pm
by Stikpusher
I found you a few more images

Image

Image

Image

more to be seen here...

http://imgrab.com/tags/amx30