Page 1 of 70

Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium, 1941

Posted: Wed Jan 30, 2019 12:20 am
by speedgraflex
W.Nr. 100
Lt. Horst Sternberg, Pilot
5./JG 26
Wevelgem, Belgium
November 1941

Image
Image
Image


Crew: 1
Length: 9.00 m (29 ft 5 in)
Wingspan: 10.51 m (34 ft 5 in)
Height: 3.95 m (12 ft 12 in)
Wing area: 18.30 m² (196.99 ft²)
Empty weight: 3,200 kg (7,060 lb)
Loaded weight: 4,417 kg (9,735 lb)
Max. takeoff weight: 4,900 kg (10,800 lb)
Powerplant: 1 × BMW 801 D-2 radial engine, 1,250 kW (1,700 PS, 1,677 hp)


Image


Focke-Wulf Fw 190
Design


Image

The Messerschmitt Bf 109 and the British Spitfire, the two fastest fighters in world at the time we began work on the Fw 190, could both be summed up as a very large engine on the front of the smallest possible airframe; in each case armament had been added almost as an afterthought. These designs, both of which admittedly proved successful, could be likened to racehorses: given the right amount of pampering and easy course, they could outrun anything. But the moment the going became tough they were liable to falter. During World War I, I served in the cavalry and in the infantry. I had seen the harsh conditions under which military equipment had to work in wartime. I felt sure that a quite different breed of fighter would also have a place in any future conflict: one that could operate from ill-prepared front-line airfields; one that could be flown and maintained by men who had received only short training; and one that could absorb a reasonable amount of battle damage and still get back. This was the background thinking behind the Focke-Wulf 190—it was not to be a racehorse but a Dienstpferd, a cavalry horse.
- Kurt Tank, Designer


Image


Pacific Coast Models, Inc.
Focke-Wulf Fw-190A-1/2/3 Combination Kit
Decals by Cartograf
Photo Etch by Eduard
Styrene and Resin by Sword

A Birthday Gift from Clint aka Floki

Image

To Be Continued

Re: Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium,

Posted: Wed Jan 30, 2019 12:39 am
by Floki
I hope you have fun building this kit, I know I will watching. I love the Butcher Birds they are just beautiful (it's close between them and the Bf110 for my favorite aircraft). I know you will do a fantastic job on this kit, I knew I was never going to build her being a 1/32 kit but wanted her to have a good home with some one who would.

Re: Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium,

Posted: Wed Jan 30, 2019 1:11 am
by speedgraflex
Floki wrote:I hope you have fun building this kit, I know I will watching. I love the Butcher Birds they are just beautiful (it's close between them and the Bf110 for my favorite aircraft). I know you will do a fantastic job on this kit, I knew I was never going to build her being a 1/32 kit but wanted her to have a good home with some one who would.
Clint—this is a beautiful kit and I am honored. My goal is to build this well. That is all. If you have any recommendations for study literature. I recall Torben aka Mostrich mentioned a two volume series on the Fw 190, but I will have to look this up again. It would help to have a reference not unlike the Valiant Airframe Series I am using on the Dornier Do 17. Perhaps one exists for this aircraft as well.

Re: Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium,

Posted: Wed Jan 30, 2019 3:19 am
by mostrich
Oooh, the initial Anton version. Still waiting for a quarterscale release.
This screams for popcorn:
:popcorn: :popcorn: :popcorn:

Re: Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium,

Posted: Wed Jan 30, 2019 7:16 am
by KSaarni
Exciting Bruce, exciting!

Wevelgem airport, then and now...
http://www.sbap.be/events/2014/005wevel ... em2014.htm

- Kari

Re: Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium,

Posted: Wed Jan 30, 2019 8:33 am
by Handiabled
I will be watching this one!

Re: Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium,

Posted: Wed Jan 30, 2019 9:36 am
by speedgraflex
Torben, Thank you—this project will take lots of popcorn once started. I would like to take decent photos of the parts as these are exquisitely formed. The resin is beautiful, but should be washed. I also need to decide if masks are best. I could build masks for the national insignias or look for ready made versions online. Hmm.

Kari, You bring such great and important information. I thank you, sir! I read the history on the link you sent. This strategically placed airport was a critical objective for Germany. I particularly felt for its defenders whom surrendered after 8 days of fighting. When reading history, a simple sentence in no way will describe what the battle to control the airport was actually like. What a fight that must have been on both sides. What a complex relationship was formed with Belgium in the years since those days as a result.

Handiabled, Thank you for following. Sincerely. I follow along with you as well, so the paths we each take will be more enjoyable as a result!

Re: Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium,

Posted: Wed Jan 30, 2019 4:35 pm
by Stikpusher
You just can’t sit still... :giggles:

:popcorn:

Re: Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium,

Posted: Wed Jan 30, 2019 11:11 pm
by speedgraflex
Amazing reference on loan from Torben’s Library arrived earlier today. Thank you, Maestro!

Image

Re: Pacific Coast Models 1/32 Fw 190A-1. Black 13. Belgium,

Posted: Wed Jan 30, 2019 11:26 pm
by Floki