Stuart wrote:That sucks Kari, Personally I'd go the AM route!
Kari's bench 2021 -->
- Medicman71
- Elite Member
- Posts: 9698
- Joined: Mon Apr 07, 2014 9:32 am
- Location: Houston, Tx
Re: Kari's bench 2021 -->
Mike
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Re: Kari's bench 2021 -->
Catastrophy hit my Wildcat build, while removing the carrier film.
The removal process of the first five roundels went so extremely well, that I decided to, why not, video film this removal process with the last, the 6:th roundel.
BUT, then Murphys Law kicked-in
- Kari
The removal process of the first five roundels went so extremely well, that I decided to, why not, video film this removal process with the last, the 6:th roundel.
BUT, then Murphys Law kicked-in
- Kari
---
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
Re: Kari's bench 2021 -->
Oh man... I'm not sure I will use those new fangled eduard decals. That's not the first fail I've seen with them.
Thanks,
John
John
- BlackSheep214
- Elite Member
- Posts: 10376
- Joined: Sun Apr 06, 2014 8:47 pm
Re: Kari's bench 2021 -->
Oh sh**.... that sucks.
“Who controls the skies, controls the fate of this Earth”
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
Re: Kari's bench 2021 -->
Oh Helvetti!!!! Sorry to see that Kari!
I'm sure it's fixable though.
Man those decals suck - they're much to much of a risk to use.
I'm sure it's fixable though.
Man those decals suck - they're much to much of a risk to use.
Stuart Templeton 'I may not be good but I'm slow...'
My blog: https://stuartsscalemodels.blogspot.com/
My blog: https://stuartsscalemodels.blogspot.com/
Re: Kari's bench 2021 -->
Thank you guys!
And yes Stuart, the swearing word Helvetti fits very well in this situation!
***
To be honest,
I lost all the mojo for this build, will hopefully continue when I find a new decal of the right size to replace this one.
And then other details, antenna cable etc, could be done as well.
I tried to replicate some wear on the paint/marking.. but, it ain't good, a new decal can save this build.
But for the time being this bird is now waiting for better days.
- Kari
And yes Stuart, the swearing word Helvetti fits very well in this situation!
***
To be honest,
I lost all the mojo for this build, will hopefully continue when I find a new decal of the right size to replace this one.
And then other details, antenna cable etc, could be done as well.
I tried to replicate some wear on the paint/marking.. but, it ain't good, a new decal can save this build.
But for the time being this bird is now waiting for better days.
- Kari
---
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
Re: Kari's bench 2021 -->
Oh, man... she's looking so so good! Can you lift the damaged decal with tape or ? If you post the diameter of the decal we can collectively rummage through the spares. This one is too nice to let sit.
Thanks,
John
John
- Duke Maddog
- Elite Member
- Posts: 7082
- Joined: Tue Jun 03, 2014 11:22 am
- Location: Rowland Heights, CA
Re: Kari's bench 2021 -->
Well, you did a magnificent job on this up to this point. I'll patiently wait for your final finish. It'll be worth the wait.
The Duke
Virtuoso of Miniatures
"Do you know what the chain of command is? It's the chain I get and beat you with 'till you understand who's in ruttin' command!"
-Jayne Cobb, Firefly Episode 2 "The Train Job"
We are modelers - the same in spirit, in hunger to insanely buy newly released kits, hustlers in hiding our stash from our better halves and experts in using garbage as replacements for after-market parts.
Virtuoso of Miniatures
"Do you know what the chain of command is? It's the chain I get and beat you with 'till you understand who's in ruttin' command!"
-Jayne Cobb, Firefly Episode 2 "The Train Job"
We are modelers - the same in spirit, in hunger to insanely buy newly released kits, hustlers in hiding our stash from our better halves and experts in using garbage as replacements for after-market parts.
- Stikpusher
- Moderator
- Posts: 18857
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: Kari's bench 2021 -->
Kari, several companies make the US stars that you need. I’m sure that one of them will cover your needs. At a minimum some F4F decal sheets come with the stars as well as the aircraft markings, so that might be an excuse to get another…
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
Re: Kari's bench 2021 -->
Thank you guys!
That seems to be the way forward!
- Kari
Thanks and you are absolutely right, I took also a look at AM decalsets, and there are a number of sets that has the decal needed.Stikpusher wrote:Kari, several companies make the US stars that you need. I’m sure that one of them will cover your needs. At a minimum some F4F decal sheets come with the stars as well as the aircraft markings, so that might be an excuse to get another…
That seems to be the way forward!
- Kari
---
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
Tamiya F-4B Phantom II 1/48
Kinetic F-16A (new tool) 1/48
https://www.facebook.com/GrundAsk-Scale ... 721218708/