Page 1 of 1

Star Trek AMT 1/650 U.S.S. Enterprise (NCC-1701).

Posted: Tue Sep 22, 2026 7:38 pm
by speedgraflex
Image

This was another project knocked out during the Covid lockdown/pandemic.

For me, there’s nothing like building this classic chestnut of a kit.

You can build it box stock.

You can add bells and whistles.

And, there is always something to learn.


Image

Re: Star Trek AMT 1/650 U.S.S. Enterprise (NCC-1701).

Posted: Tue Sep 22, 2026 7:54 pm
by cbaltrin
Wow Bruce, that is impressive. You should apply for a job at ILM :shoutout: :shoutout: :shoutout:
Just need to photograph it against a star field!

Re: Star Trek AMT 1/650 U.S.S. Enterprise (NCC-1701).

Posted: Tue Sep 22, 2026 8:33 pm
by speedgraflex
Image

Image

Thank you, Chris. Sincerely. I’ve come close a few times and each time I kick myself for not going all the way and work for a shop. Here I’ve composited my model (top image) into a still based on an episode, adding grain and knocking the color balance towards blue as indicated by the original design; I’ve included the actual still for comparison.

Re: Star Trek AMT 1/650 U.S.S. Enterprise (NCC-1701).

Posted: Wed Sep 23, 2026 5:53 am
by BlackSheep214
Incredible work! Backdrop shots ... I almost thought I was watching Star Trek opening credits. Well done!! :shoutout: :shoutout: :shoutout: :shoutout: :shoutout:

Re: Star Trek AMT 1/650 U.S.S. Enterprise (NCC-1701).

Posted: Wed Sep 23, 2026 6:45 am
by speedgraflex
Thanks so much, Tom!

Re: Star Trek AMT 1/650 U.S.S. Enterprise (NCC-1701).

Posted: Wed Sep 23, 2026 8:45 am
by Gary Brantley
Very nice indeed, Bruce! :shoutout:

Re: Star Trek AMT 1/650 U.S.S. Enterprise (NCC-1701).

Posted: Wed Sep 23, 2026 9:54 am
by Medicman71
Very cool!! :shoutout: :shoutout:

Re: Star Trek AMT 1/650 U.S.S. Enterprise (NCC-1701).

Posted: Wed Sep 23, 2026 10:43 am
by Stikpusher
Beautiful work Bruce!!! :shoutout: :shoutout: :shoutout:

You showed here what can be done with such a basic old kit. :bow: :bow: :bow:

Re: Star Trek AMT 1/650 U.S.S. Enterprise (NCC-1701).

Posted: Wed Sep 23, 2026 11:18 am
by speedgraflex
Thank you, Gary, Mike and Carlos! I hopefully have become a bit better thanks to following your work and seeing what you and others are doing. This is the way!

For context, I built the same kit prior to joining the forum. I used scotch clear tape to mask the panel details on the nacelles because I didn’t know any better.

One of my first lessons came from Carlos about using Tamiya tape. So, yeah. I know. You start somewhere.

Come a ways since then. More to go.