British phantom FGR.2 "Firebirds"

Post your work in progress of your aircraft builds in here.
Post Reply
User avatar
BlackSheep214
Elite Member
Posts: 13417
Joined: Sun Apr 06, 2014 8:47 pm

Re: British phantom FGR.2 "Firebirds"

Post by BlackSheep214 »

jeaton01 wrote:If you are going to cut the fin, it might be good to drill holes through both sides at each end first.
That was the plan if I decide to take that route.
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
jkim
Elite Member
Posts: 4073
Joined: Mon Apr 10, 2017 4:03 pm

Re: British phantom FGR.2 "Firebirds"

Post by jkim »

Yeah, the instructions could've highlighted that cut a little more! But I agree with the rest... I think cutting the part in half and gluing it onto the tail will work out just fine. Maybe even better than cutting the hole out... less filling probably.
John aka JKim
-----------<><
Image
User avatar
BlackSheep214
Elite Member
Posts: 13417
Joined: Sun Apr 06, 2014 8:47 pm

Re: British phantom FGR.2 "Firebirds"

Post by BlackSheep214 »

Yeah, I'm still deciding the best course of action on this one. I've been working on the Mirage F1 C in the meantime.
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
Stikpusher
Moderator
Posts: 21187
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: British phantom FGR.2 "Firebirds"

Post by Stikpusher »

Good idea. Think it thru. At a random moment, the course you want to follow will pop into your head.
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
BlackSheep214
Elite Member
Posts: 13417
Joined: Sun Apr 06, 2014 8:47 pm

Re: British phantom FGR.2 "Firebirds"

Post by BlackSheep214 »

After a few days of deciding how to approach this dilemma, I finally made my decision on how to proceed with the tail fin. I chose to cut out the hole that I overlooked to cut before buttoning up the fuselage.
First, under bright LED lighting, I used tape as a guide around the fin hole where it revealed under a bright LED lighting. I taped the bottom, then top and sides. Next I carefully drilled several holes in a straight line. Next I carefully cut across with a #11 blade. Sanding I used a 320 grit strip of Testors sandpaper; top and bottom. Then I used 3 different files until I was satisfied the fin will fit through the hole. Last, I used liquid glue to hold it in place. All is left is a little Perfect Putty to fill in the very minimal gaps around the fin.

Image


Image


Image

I pretty happy with the results. I'm actually surprised at myself I can do this little surgery.
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
Stikpusher
Moderator
Posts: 21187
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: British phantom FGR.2 "Firebirds"

Post by Stikpusher »

Good recover Mav… :whistle:
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Floki
Elite Member
Posts: 3548
Joined: Wed Dec 12, 2018 2:23 am
Location: Muncie, Indiana

Re: British phantom FGR.2 "Firebirds"

Post by Floki »

You fixed the problem very well.
March as one, Don't look back
Odin's sons... Attack!
Unleash hell! Do not repent! Warfare grants us no lament
Let your weapons slash and tear This is no place for fear
Hold the lines! Move as one! In unity our victory's won
Our shields will form a mighty wall
United we shall never fall
User avatar
jeaton01
Elite Member
Posts: 2374
Joined: Thu Apr 23, 2020 9:20 am
Location: Northern California
Contact:

Re: British phantom FGR.2 "Firebirds"

Post by jeaton01 »

As new!
My modelling website, with build logs.

http://goldeneramodel.com/mymodels/mymodels.html
User avatar
Handiabled
Master Member
Posts: 591
Joined: Sat Mar 15, 2014 7:13 am

Re: British phantom FGR.2 "Firebirds"

Post by Handiabled »

Nice save!
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: British phantom FGR.2 "Firebirds"

Post by KSaarni »

Well done!

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
Post Reply

Return to “Aircraft Work in Progress”