1/48 Accurate Minitures SBD Dauntless (Midway)

Post your completed aircraft here.
Post Reply
lawdog114
Master Member
Posts: 534
Joined: Tue May 20, 2014 11:46 pm
Location: Olmsted Township, Ohio

1/48 Accurate Minitures SBD Dauntless (Midway)

Post by lawdog114 »

The 1/48 Revellogram Spitfire MK II was the first kit I built when I got back into this hobby. It was painted with a borrowed Badger 250 single action airbrush and a propellant can. The second build was the now defunct Accurate Miniatures SBD-1 which came in a plain cardboard box that I pilfered from my buddy's kit stash. Not to bash Revell, but I couldn't believe the difference in mold technology between the two. I believe it was the first cockpit I ever "washed" too, but I couldn't tell you how I did it. These kits, and a few others, served as stepping stones to the modeling I'm still doing almost 12 years later. I'm by no means Master Class and still consider myself an average modeler at best, but I think I've picked up a few tricks along the way.

Anyways, now that I'm done reminiscing, I figured I would have another crack at the Accurate Miniatures Dauntless, this time the SBD-3. I've had the "Battle of Midway" Dash 3 which I got off Ebay in my stash for a few years now. The kit was gotten cheap because someone started painting it, but the seller did include a nice Eduard PE interior set which was a nice surprise.

Image

Accurate Miniatures was second to none when it came to researching their subjects. This one is no exception. Its an absolute shame they closed up shop. This particular kit comes with markings for all VB-3 Dauntless bombers from the Carrier Yorktown during the Battle of Midway. I figure I'll do this plane right here (below), piloted by Paul "Lefty" Holmberg. On June 4th of 1942, Holmberg delivered the first blow on the Japanese fleet by being the first to drop a bomb on the "Soryu". Its time I pay homage to those brave men who would avenge Pearl Harbor and turn the tide in the Pacific war for good.

Image

On this build I used the included PE in the cockpit. There is a tutorial on how I did this cockpit over in the tips section.

Image
Image

Accurate Miniatures does provide an engine wiring harness, but its way overscale so I scratchbuilt a new one with stryrene rod and stereo wire.

Image
Image
Image

......and after a Detailer wash and a shot of Tamiya Smoke. There's a more in-depth tutorial for this one over in the tips section as well.

Image

I think its an improvement...

Image

The only other additions were Quickboost gun barrels and a PE sight for rear 30s. I had some issues with the kit insignia decals, which would not unwrinkle. Otherwise, I found they build rather enjoyable. Here's it is finished.

Image
Image
Image
Image
Image
Image
Image
Image

Thanks for looking....
Joe
Can you fly this plane and land it? Surely you can't be serious? I am serious, and don't call me Shirley
User avatar
Manny1943
Addicted Member
Posts: 1293
Joined: Fri Jul 11, 2014 1:38 pm

Re: 1/48 Accurate Minitures SBD Dauntless (Midway)

Post by Manny1943 »

Very nice build...you hardly ever see any of these AM kits built up...looks like a larger version of Fermis' build!
User avatar
BorgR3mc0
Elite Member
Posts: 3311
Joined: Tue Mar 18, 2014 7:16 am
Location: Utereg

Re: 1/48 Accurate Minitures SBD Dauntless (Midway)

Post by BorgR3mc0 »

Great build lawdog!
ImageImageImageImageImage
User avatar
Paul
Addicted Member
Posts: 1069
Joined: Mon Mar 17, 2014 9:09 am
Location: Under your bed, muwahahahaha

Re: 1/48 Accurate Minitures SBD Dauntless (Midway)

Post by Paul »

That is a very beautiful build..
Image
lawdog114
Master Member
Posts: 534
Joined: Tue May 20, 2014 11:46 pm
Location: Olmsted Township, Ohio

Re: 1/48 Accurate Minitures SBD Dauntless (Midway)

Post by lawdog114 »

Thanks Guys. Yes, several other companies seem to have "borrowed" AM molds and re-released the kits under their name. Its my understanding AM still owns them and they are "rented out" to the likes of Italieri, Academy etc..... I found this out when I tried to get a replacement part for the SBD-3. Too bad the prices are way over inflated now. The Academy Dauntless SBD-2 has an MSRP of almost 60 bones now..... :poo: At least we can still find these great kits on Ebay at reasonable prices. I found the Coral Sea addition there for 23 bones last month. :tease:

Joe
Can you fly this plane and land it? Surely you can't be serious? I am serious, and don't call me Shirley
User avatar
AIRFIXER
Advanced Member
Posts: 279
Joined: Mon Mar 17, 2014 9:32 am
Location: Vogsphere

Re: 1/48 Accurate Minitures SBD Dauntless (Midway)

Post by AIRFIXER »

I'd say this is a mighty fine model. Impeccable.

Cheers,
Erik
Post Reply

Return to “Completed Builds”