Modelcrazy's bench production 2022

Show off your completed work! One or two pictures and a brief explanation. Let others have a quick look at your finished masterpieces!
User avatar
Duke Maddog
Elite Member
Posts: 7669
Joined: Tue Jun 03, 2014 11:22 am
Location: Rowland Heights, CA

Re: Modelcrazy's bench production 2021

Post by Duke Maddog »

Thank you for the compliment MC. I think you are doing magnificent with the group of builds you have going. Keep them coming!
The Duke
Virtuoso of Miniatures

"Do you know what the chain of command is? It's the chain I get and beat you with 'till you understand who's in ruttin' command!"
-Jayne Cobb, Firefly Episode 2 "The Train Job"

We are modelers - the same in spirit, in hunger to insanely buy newly released kits, hustlers in hiding our stash from our better halves and experts in using garbage as replacements for after-market parts.
User avatar
Medicman71
Elite Member
Posts: 11301
Joined: Mon Apr 07, 2014 9:32 am
Location: Houston, Tx

Re: Modelcrazy's bench production 2021

Post by Medicman71 »

Nice work on your builds! I have so many going right now it's insane, even for me. :headslap:
Mike

Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
User avatar
Modelcrazy
Addicted Member
Posts: 1429
Joined: Sun Mar 19, 2017 12:01 pm
Location: Sherman texas

Re: Modelcrazy's bench production 2021

Post by Modelcrazy »

I'm having a little issue with that seam although it's nothing to worry about, I've dealt with worse. I'm out of Vallejo putty at the moment and am using Tamiya putty. The difference it the Tamiya is lacquer based and Vallejo, Acrylic. I'm sure someone will correct me but you know what I mean. Tamiya is more difficult to remove than Vallejo....but it holds better. I filled the little areas that needed it and started on the deck. I sprayed Tamiya deck tan first and cut masking tape strips to cover random planks. My next coat will be a slightly darker deck tan, rinse and repeat. Eventually I should end up with planks with a tonal variation. Then mask off all the wood and spray the grey.

The Bismarck was new and the turrets were repainted four, maybe five times. The weathering will be more on the streaking side caused by the salt spray with no rust.
At the point I'm portraying it, it will have been running the Denmark strait and had not yet engaged the Norfolk.

Image
Image
Building a kit from your stash is like cutting the head off a Hydra, two more take it’s place.

Image

https://www.youtube.com/results?search_ ... obby+bench
User avatar
Ceaser_Sa1ad
Master Member
Posts: 916
Joined: Tue Aug 31, 2021 1:23 pm
Location: Ontario

Re: Modelcrazy's bench production 2021

Post by Ceaser_Sa1ad »

I just spent the last 2 days reading this one thread, and may I say that was anything BUT a waste of time.
You sir, have talent beyond the scope of the word "talent" can hope to describe. Absolutely incredible work, I am more than impressed.
Also, that Mig :wub: Every since I watched Top Gun, variable wing sweep has been my secret love affair.
"In this galaxy there's a mathematical probability of three million Earth type planets. And in all of the universe, three million million galaxies like this. And in all of that... and perhaps more... only one of each of us." - McCoy
User avatar
Modelcrazy
Addicted Member
Posts: 1429
Joined: Sun Mar 19, 2017 12:01 pm
Location: Sherman texas

Re: Modelcrazy's bench production 2021

Post by Modelcrazy »

Thank you very much for the kind words. It wasn't until I joined a few forums that I was able to achieve the level (still very low) I am able to do now. The fine folks on these and a few other forums have helped me immensely with history and techniques. There is always something new that can be learned.
I'm at Newport Oregon until Wed for our summer vaca and went to the air museum in Tillamook. There they have an F-14 from Top Gun, which of course I took copious pictures of. I have a 14 in every scale, except 32nd and really look forward to building one when I get an opportunity to concentrate on it.
Building a kit from your stash is like cutting the head off a Hydra, two more take it’s place.

Image

https://www.youtube.com/results?search_ ... obby+bench
User avatar
Stuart
Elite Member
Posts: 11912
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales

Re: Modelcrazy's bench production 2021

Post by Stuart »

Ceaser_Sa1ad wrote:Also, that Mig :wub: Every since I watched Top Gun, variable wing sweep has been my secret love affair.
As a child of the 70s and 80s, I can assure you that just like pop up headlights, ANY aircraft with a swing-wing is instantly the coolest.

(he says looking at the two Tornados and Tomcat sitting on the shelf waiting to be finished..) :hmm:
Stuart Templeton 'I may not be good but I'm slow...'
User avatar
Ceaser_Sa1ad
Master Member
Posts: 916
Joined: Tue Aug 31, 2021 1:23 pm
Location: Ontario

Re: Modelcrazy's bench production 2021

Post by Ceaser_Sa1ad »

Modelcrazy wrote:Thank you very much for the kind words. It wasn't until I joined a few forums that I was able to achieve the level (still very low) I am able to do now. The fine folks on these and a few other forums have helped me immensely with history and techniques. There is always something new that can be learned.
I'm at Newport Oregon until Wed for our summer vaca and went to the air museum in Tillamook. There they have an F-14 from Top Gun, which of course I took copious pictures of. I have a 14 in every scale, except 32nd and really look forward to building one when I get an opportunity to concentrate on it.
That is fantastic! I would love to visit there sometime to see the Tomcat.
I did the f14 in 1/72, I think by Hasegawa. Loved it, and I really need to make another one.
Stuart wrote: As a child of the 70s and 80s, I can assure you that just like pop up headlights, ANY aircraft with a swing-wing is instantly the coolest.

(he says looking at the two Tornados and Tomcat sitting on the shelf waiting to be finished..) :hmm:
I love pop up headlights too! And yes, anything that has moving wings ultimately is superior XD
"In this galaxy there's a mathematical probability of three million Earth type planets. And in all of the universe, three million million galaxies like this. And in all of that... and perhaps more... only one of each of us." - McCoy
User avatar
Medicman71
Elite Member
Posts: 11301
Joined: Mon Apr 07, 2014 9:32 am
Location: Houston, Tx

Re: Modelcrazy's bench production 2021

Post by Medicman71 »

Do I sense a Tomcat GB? Maybe for next year?
Mike

Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
User avatar
BlackSheep214
Elite Member
Posts: 13419
Joined: Sun Apr 06, 2014 8:47 pm

Re: Modelcrazy's bench production 2021

Post by BlackSheep214 »

Why limit to just F-14 Tomcats? Why not broaden your choices to other carrier based aircrafts. Why not a Carrier Based Aircraft Group Build instead? :hmm:
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
keavdog
Elite Member
Posts: 4782
Joined: Thu Jan 10, 2019 1:14 am
Location: Earth

Re: Modelcrazy's bench production 2021

Post by keavdog »

Or a swing-wing build
Thanks,
John
Post Reply

Return to “Member's Gallery”