![Image](https://live.staticflickr.com/65535/51678223915_fe56faef7e_b.jpg)
![Image](https://live.staticflickr.com/65535/51678015934_a24902ba08_b.jpg)
The kit seems decent enough considering it is now about 25 years old, and should be a relatively straightforward build.
The first steps covered building up the lower chassis.
![Image](https://live.staticflickr.com/65535/51793356731_521c9bb5ef_b.jpg)
Followed by adding the details to the sides of the body before assembling the flat sides to form the superstructure.
![Image](https://live.staticflickr.com/65535/51794094600_2234a4853e_b.jpg)
The sides went together well, taking care to make sure they stayed aligned while to glue dried.
![Image](https://live.staticflickr.com/65535/51794094400_9ea41fa3cf_b.jpg)
The turret went together nicely too. I had to fill the locating dimples for the forward vision ports on the forward sided of the turret. I used a piece of Evergreen strip stock followed by putty to fill and blend the dimples into the turret sides.
![Image](https://live.staticflickr.com/65535/51792409617_446f7cae34_b.jpg)
And finally the major parts all sat together to see how it’s going to look.
![Image](https://live.staticflickr.com/65535/51792409392_77279b7fe7_b.jpg)
Next up will be attending to some of the details and joining the major components together.