Revell 1970 Ford Mustang Pastel Blue

Here is the place to show off the progress of your automobile builds
User avatar
midnightprowler
Addicted Member
Posts: 1426
Joined: Sun Jul 10, 2016 5:46 pm
Location: East Bethel, MN USA
Contact:

Re: Revell 1970 Ford Mustang Pastel Blue

Post by midnightprowler »

Color looks spot on to me. Use a 1mm Molotow chrome pen on the lettering.
1 Corinthians 15:51-54
1 Thessalonians 4:13-18
Ask me about Speedway Decals.
User avatar
LyleW
Admin
Posts: 15035
Joined: Fri Dec 13, 2013 7:25 am
Location: Mt. Washington KY

Re: Revell 1970 Ford Mustang Pastel Blue

Post by LyleW »

Thanks! I just showed to Pam and she said that was it. So, score one for me!

A 1 mm pen and a bottle of bourbon!
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
User avatar
LyleW
Admin
Posts: 15035
Joined: Fri Dec 13, 2013 7:25 am
Location: Mt. Washington KY

Re: Revell 1970 Ford Mustang Pastel Blue

Post by LyleW »

Thought I'd finish wet sanding the body (of the car) this morning. Then I saw two small places on the hood that I managed to sand through the blue. Oh well. I'll hit that again in a bit.

I am extremely happy with the paint on this and will stop at this point...as soon as I repaint the hood. The MCW paint is a joy to use.

Image

Done

Image

Image

Image

Image
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
User avatar
midnightprowler
Addicted Member
Posts: 1426
Joined: Sun Jul 10, 2016 5:46 pm
Location: East Bethel, MN USA
Contact:

Re: Revell 1970 Ford Mustang Pastel Blue

Post by midnightprowler »

:wub:
1 Corinthians 15:51-54
1 Thessalonians 4:13-18
Ask me about Speedway Decals.
User avatar
Medicman71
Elite Member
Posts: 11299
Joined: Mon Apr 07, 2014 9:32 am
Location: Houston, Tx

Re: Revell 1970 Ford Mustang Pastel Blue

Post by Medicman71 »

Very nice Lyle!
Mike

Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
User avatar
BlackSheep214
Elite Member
Posts: 13412
Joined: Sun Apr 06, 2014 8:47 pm

Re: Revell 1970 Ford Mustang Pastel Blue

Post by BlackSheep214 »

Very nice indeed, Lyle! Well done! :shoutout: :shoutout: :shoutout: :shoutout: :shoutout:
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
LyleW
Admin
Posts: 15035
Joined: Fri Dec 13, 2013 7:25 am
Location: Mt. Washington KY

Re: Revell 1970 Ford Mustang Pastel Blue

Post by LyleW »

Well, not sure how long that finish will last! This is the fit of the rear body panel. It is too tall, too wide and somewhat poorly shaped to fit precisely in the opening.

Image

So, I took a rear panel from a spare kit, did some trimming across the top and sides.

Image

Image

Still fine tuning the fit, but it is much more bettererer

Image

Image

But, I do have questions.
1) Should I have left it as in the original and somehow filled the huge gap? Still would have needed to trim the sides.
2) Miliput to fill what is left?

Copious amounts of masking to protect what is for me the best car finish I've ever done.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
User avatar
BlackSheep214
Elite Member
Posts: 13412
Joined: Sun Apr 06, 2014 8:47 pm

Re: Revell 1970 Ford Mustang Pastel Blue

Post by BlackSheep214 »

Fire off a PM to Joe. Maybe he can advise you. Is the first image of the rear panel from the kit?
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
BlackSheep214
Elite Member
Posts: 13412
Joined: Sun Apr 06, 2014 8:47 pm

Re: Revell 1970 Ford Mustang Pastel Blue

Post by BlackSheep214 »

I’m looking in scalemates of your Mustang kit. Can’t tell since your images of the box cover was removed. Which kit is it? Perhaps a kit stock number would help.

Anyhow, from one instruction guide, there is a panel for the rear tail lights that has to be installed first. My guess that panel has a notch of sorts to go underneath the rear portion of trunk.

Did she own the Mach 1? If so, the MUSTANG needs to sanded off the truck base according the instruction guide in Step 7. Not sure if this was the right kit you’re working on.

https://www.scalemates.com/kits/revell- ... -1--111917

The instruction guide of the kit above...

https://www.scalemates.com/products/img ... ctions.pdf
Last edited by BlackSheep214 on Sun Jan 09, 2022 12:00 pm, edited 1 time in total.
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
keavdog
Elite Member
Posts: 4780
Joined: Thu Jan 10, 2019 1:14 am
Location: Earth

Re: Revell 1970 Ford Mustang Pastel Blue

Post by keavdog »

I think it's supposed to slip under the trunk deck - recessed.
Image
Last edited by keavdog on Sun Jan 09, 2022 1:16 pm, edited 1 time in total.
Thanks,
John
Post Reply

Return to “Work In Progress: Automobiles”