Elvis Tank, Dragon M48A1
Re: Elvis Tank, Dragon M48A1
I might be able to resin print you a Elvis head. Not sure what is out there
March as one, Don't look back
Odin's sons... Attack!
Unleash hell! Do not repent! Warfare grants us no lament
Let your weapons slash and tear This is no place for fear
Hold the lines! Move as one! In unity our victory's won
Our shields will form a mighty wall
United we shall never fall
Odin's sons... Attack!
Unleash hell! Do not repent! Warfare grants us no lament
Let your weapons slash and tear This is no place for fear
Hold the lines! Move as one! In unity our victory's won
Our shields will form a mighty wall
United we shall never fall
- Stikpusher
- Moderator
- Posts: 19020
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: Elvis Tank, Dragon M48A1
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
- Stikpusher
- Moderator
- Posts: 19020
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: Elvis Tank, Dragon M48A1
So I’ve made a bit more progress over the past few days…
First up, I added the engine rear and top deck areas, the biggest visual difference between the M48/M48A1 and all of the follow on variants. Much closer is appearance to the preceding M46 & M47, than the A2, A3, A5 and M60 family engine decks…
Then earlier today I added the road wheel arms, shocks, and final drive housings
More to come in a day or two….
First up, I added the engine rear and top deck areas, the biggest visual difference between the M48/M48A1 and all of the follow on variants. Much closer is appearance to the preceding M46 & M47, than the A2, A3, A5 and M60 family engine decks…
Then earlier today I added the road wheel arms, shocks, and final drive housings
More to come in a day or two….
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
- Stikpusher
- Moderator
- Posts: 19020
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: Elvis Tank, Dragon M48A1
Had a short workbench session today.., I glued on all the road wheels and did the basic construction of the fenders. The sprocket wheels are test fitted but not glued in place until I add the tracks. I’m deviating fro. The instruction a bit now by concentrating on the hull before I start on the turret. The instructions by this point have you bouncing back and forth.
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
- Stikpusher
- Moderator
- Posts: 19020
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: Elvis Tank, Dragon M48A1
Today I got in a few good long bench sessions and finished up the hull.
First up I added the BII tools and PE detail bits to the fenders, glued on the tracks, then glued the fenders in place
then later on I added the tow cables to the fenders, and the last detail items to the glacis area
Now it’s all ready for priming the hull… I have another project that I want to prime, so two projects during the same priming session, and then I can start assembly on the turret later in the week.
First up I added the BII tools and PE detail bits to the fenders, glued on the tracks, then glued the fenders in place
then later on I added the tow cables to the fenders, and the last detail items to the glacis area
Now it’s all ready for priming the hull… I have another project that I want to prime, so two projects during the same priming session, and then I can start assembly on the turret later in the week.
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
- Gary Brantley
- Addicted Member
- Posts: 1760
- Joined: Tue Apr 08, 2014 9:40 pm
- Location: Cameron, Texas
Re: Elvis Tank, Dragon M48A1
Good progress Carlos! You're well on the way. What is that large, tube-like thing just to the driver's left?
- Stikpusher
- Moderator
- Posts: 19020
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: Elvis Tank, Dragon M48A1
Thanks Gary. Those tubes are heater exhausts for the internal vehicle heaters. A definite necessity for any vehicles in Europe for much of the year….
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
- Medicman71
- Elite Member
- Posts: 9823
- Joined: Mon Apr 07, 2014 9:32 am
- Location: Houston, Tx
Re: Elvis Tank, Dragon M48A1
It's coming along nicely Stik!
Mike
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
- Stikpusher
- Moderator
- Posts: 19020
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: Elvis Tank, Dragon M48A1
Thanks Mike!
Since I had the airbrush up and running today, and the primer mixed properly, I also airbrushed on a coat onto the hull of this one after finishing with the Crusader AA session.
I just left the driver periscopes undone as those are clear and I need to do an interior silver coat on those first.
Now I need to start on the turret assembly…
Since I had the airbrush up and running today, and the primer mixed properly, I also airbrushed on a coat onto the hull of this one after finishing with the Crusader AA session.
I just left the driver periscopes undone as those are clear and I need to do an interior silver coat on those first.
Now I need to start on the turret assembly…
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
Re: Elvis Tank, Dragon M48A1
Awesome, I'm liking how you assemble everything and then prime it as a whole. When I get my Neo I'll have to have a go with that.
What type of tracks are those?
What type of tracks are those?
Stuart Templeton 'I may not be good but I'm slow...'
My blog: https://stuartsscalemodels.blogspot.com/
My blog: https://stuartsscalemodels.blogspot.com/