Kari's bench 2021 -->

Show off your completed work! One or two pictures and a brief explanation. Let others have a quick look at your finished masterpieces!
User avatar
BlackSheep214
Elite Member
Posts: 13412
Joined: Sun Apr 06, 2014 8:47 pm

Re: Kari's bench 2021 -->

Post by BlackSheep214 »

Stuart wrote: Tue Apr 09, 2024 3:35 am :hmm: Arma kits... Very much a case of the 'Emperors New Trousers' I think. I did want to get their P-39 but I've been a bit put off by the Hurricane. I suspect I will get one, I'll just have lower expectations.

I think that's half the problem though isn't it. It's not that any of these kits are bad or unbuildable (as you're proving with this Hurricane), its just that there is sooooooo much hype and build up around their release, that when you get one and find that it's not the 'wonder-kit' you were expecting, that it kills all the enjoyment. That's exactly what happened to me with that 1/48 Airfix P-51 I built. It's partly why I've stopped reading reviews.
I agree. Arma has a habit of hyping up their kits, even new releases. Most of his kits are 1/72 scale, not so much for 1/48 scale. I had thought of getting one of their kits even though I'm hearing some of their quirks. Someday, I'll bite and get one for the sake of the challenge in building an Arma kit.
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
tempestjohnny
Elite Member
Posts: 3804
Joined: Sat Oct 15, 2016 4:51 am
Location: Naples. FL

Re: Kari's bench 2021 -->

Post by tempestjohnny »

Stuart wrote: Tue Apr 09, 2024 3:35 am :hmm: Arma kits... Very much a case of the 'Emperors New Trousers' I think. I did want to get their P-39 but I've been a bit put off by the Hurricane. I suspect I will get one, I'll just have lower expectations.

I think that's half the problem though isn't it. It's not that any of these kits are bad or unbuildable (as you're proving with this Hurricane), its just that there is sooooooo much hype and build up around their release, that when you get one and find that it's not the 'wonder-kit' you were expecting, that it kills all the enjoyment. That's exactly what happened to me with that 1/48 Airfix P-51 I built. It's partly why I've stopped reading reviews.
I have the F-6C Mustang kit. I haven't inspected closely but I've heard its fantastic
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: Kari's bench 2021 -->

Post by KSaarni »

While the Arma Hurricane is waiting for more paintwork

Image

I decided, just for fun, to do a quick shadow build of Airfix Hurricane Mk I, tooling anno 1978 in other words 45 years older then the Arma.
Just to see how the end result visually will be between these two Hurries

Image


- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
Stuart
Elite Member
Posts: 11899
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales

Re: Kari's bench 2021 -->

Post by Stuart »

That is a cracking little kit - one of my favourites although I've not built one for a few years. It's actually on my to-buy list this year as I want to build another SAAF North African Hurricane and I have a spare Vokes filter collecting dust ready for it.

Yes the cockpit is simple, but you can't see it through the canopy anyway, especially if you add the pilot, and yes there is no U/C bay detail - but who looks under a model on the shelf anyway!
Stuart Templeton 'I may not be good but I'm slow...'
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: Kari's bench 2021 -->

Post by KSaarni »

Thanks Stuart, yes it is a cracking little kit!

And it has that old classic Airfix, brittle but so sharp grey plastic!
Brings almost back some childhood memories!

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
LyleW
Admin
Posts: 15035
Joined: Fri Dec 13, 2013 7:25 am
Location: Mt. Washington KY

Re: Kari's bench 2021 -->

Post by LyleW »

Busy man! Great looking work, too.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Kari's bench 2025

Post by KSaarni »

2024 was not really a success for me in number of finished builds, then again number of started builds was, euhm... :bag:

But that was then, now a new year has started and let's start from an almost clean table, with some 2024 projects following to 2025 (The Avenger among a few other ones)

A deep cleaned (except the filter) paint booth waiting to be used.

Image

Can anyone recognize what aircraft is about to be the first one getting the cockpit and bits and pieces soon primed..

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
speedgraflex
Moderator
Posts: 11358
Joined: Fri Feb 10, 2017 11:08 pm
Contact:

Re: Kari's bench 2021 -->

Post by speedgraflex »

Kari—

Grateful for your friendship and look forward to following along with you as you build anything at all. You’re one of the many reasons model building forums actually work to inform and improve model building. It’s refreshing to be able to share ideas and work through experiences as well as to have those moments of inspiration and joy that may or not be followed by disappointment and discussion. I painted a cowling brown an hour ago. The paint was smooth but the darker color revealed I needed more surface preparation! That’s how it goes. One step…

Oh I did look at what you’re building in the corner. I’m not sure. World War II prop aircraft, US maybe? I dunno.
Make more models!
User avatar
BlackSheep214
Elite Member
Posts: 13412
Joined: Sun Apr 06, 2014 8:47 pm

Re: Kari's bench 2025

Post by BlackSheep214 »

KSaarni wrote: Wed Jan 01, 2025 7:00 am 2024 was not really a success for me in number of finished builds, then again number of started builds was, euhm... :bag:

But that was then, now a new year has started and let's start from an almost clean table, with some 2024 projects following to 2025 (The Avenger among a few other ones)

A deep cleaned (except the filter) paint booth waiting to be used.

Image

Can anyone recognize what aircraft is about to be the first one getting the cockpit and bits and pieces soon primed..

- Kari

Avenger or Dauntless :giggles:
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: Kari's bench 2025

Post by KSaarni »

BlackSheep214 wrote: Wed Jan 01, 2025 10:37 am
Avenger or Dauntless :giggles:
Dauntless! :-)

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
Post Reply

Return to “Member's Gallery”