After the putty dried I filed it until it was as it should be
Then I placed templates for the upcoming riveting and new correct panels. Enjoy
Messerschmitt bf109 G10
Re: Messerschmitt bf109 G10
Dear all here is today's update on the Aircraft.
After the putty dried I filed it until it was as it should be
Then I placed templates for the upcoming riveting and new correct panels. Enjoy
After the putty dried I filed it until it was as it should be
Then I placed templates for the upcoming riveting and new correct panels. Enjoy
Cut...File...Glue...Paint and...Repeat 
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Re: Messerschmitt bf109 G10
Well....today i found out I made a mistake on the fuselage 
...I made horizontal panelling...and only vertical panelling is present on the aircraft 
..so it was correction day...
I managed to do all the rivets on the upper wings and the link to the drop tank...Enjoy
...I made horizontal panelling...and only vertical panelling is present on the aircraft ..so it was correction day... I managed to do all the rivets on the upper wings and the link to the drop tank...Enjoy
Cut...File...Glue...Paint and...Repeat
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
-
Stikpusher
- Moderator
- Posts: 21081
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: Messerschmitt bf109 G10
You are a master at the filler work! 
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
-
BlackSheep214
- Elite Member
- Posts: 13277
- Joined: Sun Apr 06, 2014 8:47 pm
Re: Messerschmitt bf109 G10
“Who controls the skies, controls the fate of this Earth”
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
-
Medicman71
- Elite Member
- Posts: 11247
- Joined: Mon Apr 07, 2014 9:32 am
- Location: Houston, Tx
Re: Messerschmitt bf109 G10
Wow! That work is insane.
Mike
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Re: Messerschmitt bf109 G10
Last edited by FullMetal on Mon Jun 15, 2026 12:08 pm, edited 1 time in total.
Cut...File...Glue...Paint and...Repeat
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Re: Messerschmitt bf109 G10
Thanks
Cut...File...Glue...Paint and...Repeat
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Re: Messerschmitt bf109 G10
Thank you
Cut...File...Glue...Paint and...Repeat
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Re: Messerschmitt bf109 G10
So here is the panel line filling and panel line engraving.
To fill the the wrong panels I used a FANTASTIC product : UV putty...you place it, you use a UV light, it hardens in 10 seconds filling any gap and then you file...
The only issue is that the putty is transparent...
To fill the the wrong panels I used a FANTASTIC product : UV putty...you place it, you use a UV light, it hardens in 10 seconds filling any gap and then you file...
The only issue is that the putty is transparent...
Cut...File...Glue...Paint and...Repeat
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Follow me on YouTube https://www.youtube.com/@Fullmetalpainter
Re: Messerschmitt bf109 G10
- Kari
---
On the bench:
MiniArt 1:48 - Junkers F13 Float Plane
https://www.facebook.com/GrundAsk-Scale ... 721218708/
On the bench:
MiniArt 1:48 - Junkers F13 Float Plane
https://www.facebook.com/GrundAsk-Scale ... 721218708/