Did all the plumbing come in the kit? The braided wiring and all? If not, how did you do that? Frikkin' fabulous!
trumpeter 1/32 me 262
-
Stikpusher
- Moderator
- Posts: 21186
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: trumpeter 1/32 me 262
Beautiful!
Did all the plumbing come in the kit? The braided wiring and all? If not, how did you do that? Frikkin' fabulous!
Did all the plumbing come in the kit? The braided wiring and all? If not, how did you do that? Frikkin' fabulous!
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
Re: trumpeter 1/32 me 262
thanks stikpusher !
the wiring did not come in the kit. the ip panel wiring is actually fiber optic strands
i stole out of swmbo's lamp out in the living room .
(she didn't notice it looks a little bare)
the braid is for model cars to make the radiator hoses. it looked about the right size so i used it.
one could also use picture hanging wire , its multi stranded . for the individual wires going to the control boxes i used fine copper wire , one piece at a time .
gino
the wiring did not come in the kit. the ip panel wiring is actually fiber optic strands
i stole out of swmbo's lamp out in the living room .
(she didn't notice it looks a little bare)the braid is for model cars to make the radiator hoses. it looked about the right size so i used it.
one could also use picture hanging wire , its multi stranded . for the individual wires going to the control boxes i used fine copper wire , one piece at a time .
gino
-
Stikpusher
- Moderator
- Posts: 21186
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: trumpeter 1/32 me 262
The braided stuff in the wheel well is for car models? Nice! What is it called and where do you find it? Looks like it would be great for oxygen lines with some Green paint... 
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
Re: trumpeter 1/32 me 262
yes "detail master" is the brand name. 1/25 scale braided radiator hose.
i even have the fittings for the ends (sold separately of course) .
http://www.detailmaster.com/mm5/merchan ... ittings-BL
if it is of any help i also have berkley braided nylon fishing line 25 LB test .
it's black and very flexible. i used it to simulate winch cable on tow truck models i have built .
gino
i even have the fittings for the ends (sold separately of course) .
http://www.detailmaster.com/mm5/merchan ... ittings-BL
if it is of any help i also have berkley braided nylon fishing line 25 LB test .
it's black and very flexible. i used it to simulate winch cable on tow truck models i have built .
gino
-
Stikpusher
- Moderator
- Posts: 21186
- Joined: Sat Apr 05, 2014 8:37 pm
- Location: Ceti Alpha 5
Re: trumpeter 1/32 me 262
Oh I still have plenty of parachute cord guts to fill all my tow cable needs... I'll have to have a look around for that radiator line. Thanks.
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."
FLSM
FLSM
-
Medicman71
- Elite Member
- Posts: 11299
- Joined: Mon Apr 07, 2014 9:32 am
- Location: Houston, Tx
Re: trumpeter 1/32 me 262
Very nice!! The detailing looks awesome! 
Mike
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Re: trumpeter 1/32 me 262
made some progress on this kit. something I have been thinking about since I started working on it.
working cannon bay covers. finally got enough motivation to pull it off. photo etch piano hinges made for 1/25 truck kits.
very tedious work and took the better part of last Monday to get to this point.
the only problem is the middle panel between the covers sits a little high off the fuse especially at the rear . it came out a little too wide and had to raise it to get the best fit . i left it sit for a few days and it bugs me less than it did before. would be a tough fix. I have read that the covers don't fit that well on the real one . anyone care to comment ?
should I fix or run it ?
gino
working cannon bay covers. finally got enough motivation to pull it off. photo etch piano hinges made for 1/25 truck kits.
very tedious work and took the better part of last Monday to get to this point.
the only problem is the middle panel between the covers sits a little high off the fuse especially at the rear . it came out a little too wide and had to raise it to get the best fit . i left it sit for a few days and it bugs me less than it did before. would be a tough fix. I have read that the covers don't fit that well on the real one . anyone care to comment ?
should I fix or run it ?
gino
-
BlackSheep214
- Elite Member
- Posts: 13417
- Joined: Sun Apr 06, 2014 8:47 pm
Re: trumpeter 1/32 me 262
That is freakin' awesome work, gino!
“Who controls the skies, controls the fate of this Earth”
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
Re: trumpeter 1/32 me 262
Nice work Gino - and a great idea.
I can see what you mean - it does sit a little high, but I suspect it'll be less noticeable under paint, and if you display it with the doors open you can't see it.
Cheers!
Stuart
I can see what you mean - it does sit a little high, but I suspect it'll be less noticeable under paint, and if you display it with the doors open you can't see it.
Cheers!
Stuart
Stuart Templeton 'I may not be good but I'm slow...'
Re: trumpeter 1/32 me 262
thanks blacksheep !
thanks stuart !
gino
thanks stuart !
gino