Sprues
masking the cracked canopy.
I've sent Minicraft an e-mail asking for a replacement. We'll see.
MiniCraft 1/48 X5F-1
MiniCraft 1/48 X5F-1
Here we go. Sitting here listening to the sound of clamps popping off the wings. Love it.
Sprues
masking the cracked canopy.
I've sent Minicraft an e-mail asking for a replacement. We'll see.
Sprues
masking the cracked canopy.
I've sent Minicraft an e-mail asking for a replacement. We'll see.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
-
Thomas_M
- Admin
- Posts: 4244
- Joined: Fri Dec 13, 2013 9:43 am
- Location: Bad Wurzach - Germany
- Contact:
Re: MiniCraft 1/48 X5F-1
Lyle, to me the first two pictures look like being the same?!?
Why was the canopy cracked? Hope your chair wasn´t in aggressive mode...
Why was the canopy cracked? Hope your chair wasn´t in aggressive mode...
-
BlackSheep214
- Elite Member
- Posts: 13163
- Joined: Sun Apr 06, 2014 8:47 pm
Re: MiniCraft 1/48 X5F-1
Following this build since I have the same kit you have.
“Who controls the skies, controls the fate of this Earth”
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney
“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
Re: MiniCraft 1/48 X5F-1
different pics, same sprue. I deleted the dup. Canopy cracked when I was masking it. Nothing done in frustration! ....yet.Thomas_M wrote:Lyle, to me the first two pictures look like being the same?!?
Why was the canopy cracked? Hope your chair wasn´t in aggressive mode...
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
Re: MiniCraft 1/48 X5F-1
I can promise it won't be fancied up. Completely OOB most likely. I got the long-nose a few days ago. Cherrylock built both a while back.BlackSheep214 wrote:Following this build since I have the same kit you have.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
-
Thomas_M
- Admin
- Posts: 4244
- Joined: Fri Dec 13, 2013 9:43 am
- Location: Bad Wurzach - Germany
- Contact:
Re: MiniCraft 1/48 X5F-1
Should look ace when being airbrushed in Aclad! Lyle, I´d first paint the wing in matte white or yellow as a primer for the gloss yellow! 
Re: MiniCraft 1/48 X5F-1
That is the plan so far. May use rattle can Chrome Silver, though.Thomas_M wrote:Should look ace when being airbrushed in Aclad! Lyle, I´d first paint the wing in matte white or yellow as a primer for the gloss yellow!
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
Re: MiniCraft 1/48 X5F-1
"...should look Ace!" - I don't know Thomas. Bought some Rust-o-leum primer and gloss (black and white) and a gray. Here is where it is today.
That is a bit of Perfect Plastic Putty. There was a slight indention at the wing/fuse join. This early version has no wing fillets, so i'm trying to get the join as straight as possible.
I had also forgotten how iffy Minicraft plastic can be. Soft and soapy texture. This build almost met the Hammer of Doom not too long ago. Assembly seems a bit stupid. The engine cowl rings are a part of the engine assembly. They are separate, but have to be added with the props. Not doing this, but not sure what I will do. The nacelles are just as goofy. Very poor attach points, gluing surface and you are supposed to add the landing gear as you join the halves. No wonder I need coffee.
That is a bit of Perfect Plastic Putty. There was a slight indention at the wing/fuse join. This early version has no wing fillets, so i'm trying to get the join as straight as possible.
I had also forgotten how iffy Minicraft plastic can be. Soft and soapy texture. This build almost met the Hammer of Doom not too long ago. Assembly seems a bit stupid. The engine cowl rings are a part of the engine assembly. They are separate, but have to be added with the props. Not doing this, but not sure what I will do. The nacelles are just as goofy. Very poor attach points, gluing surface and you are supposed to add the landing gear as you join the halves. No wonder I need coffee.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
-
Thomas_M
- Admin
- Posts: 4244
- Joined: Fri Dec 13, 2013 9:43 am
- Location: Bad Wurzach - Germany
- Contact:
Re: MiniCraft 1/48 X5F-1
I see your point, Lyle. I guess back the the guys who did the design job of a kit never had build one their own... So they went away with some rather stupid designs.
You are on a fast path! Wings and fuse together, wow!
You are aware that a gloss silver finish needs a gloss (black) base coat?
You are on a fast path! Wings and fuse together, wow!
You are aware that a gloss silver finish needs a gloss (black) base coat?
Re: MiniCraft 1/48 X5F-1
Yeah, just bought a big can of gloss black. . . and white.Thomas_M wrote:I see your point, Lyle. I guess back the the guys who did the design job of a kit never had build one their own... So they went away with some rather stupid designs.
You are on a fast path! Wings and fuse together, wow!
You are aware that a gloss silver finish needs a gloss (black) base coat?
This really wasn't all that fast. To get this far only took a dozen parts.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..