Airfix VC Icons set

Post your work in progress of your aircraft builds in here.
User avatar
Stuart
Elite Member
Posts: 11907
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales

Airfix VC Icons set

Post by Stuart »

I know I’ve probably mentioned this before but as I have no permanent modelling area, I have two modelling tray things that I work on, each with their own basic set of tools/materials so I don’t have to keep swapping stuff over.

The kitchen tray (where I use all my water based materials) is in full swing at the moment with the almost finished Fury and the Saturn V, but my other tray, which I normally take to work so I can do some modelling over lunch in my car, has been laying idle for nearly two months - mainly owing to a lack of Mojo and too many work commitments – And the fact that now I take my son to school before work every day, and his booster seat takes up the space were my big toolbox used to sit.

So today I decided to rejuvenate my lunch time modelling, I’ve found an old smaller toolbox that fits into the foot-well and moved my stuff into that – and then a very strange thing happened…

For the first time in as long as I can remember I didn’t have a kit in WIP or a GB to start – which meant that I could actually pull a kit out of the stash! That hasn’t happened in ages and was a rather nice experience.

As it was I’ve decided to go with this – The Airfix VC Icons set. It’s a rather nice set with four old tool kits and brand new Cartograph decals depicting various Victoria Cross Winners of WWII.

Image

I mainly decided to go with this as I’ve recently decided to build all the kits that I’ve been given as presents over the years – and this had been sitting in the stash for the longest. I have already started it to some extent – the Hurricane was finished and the Blenheim and Hampden had their interiors started – however work ground to a halt as the Blenheim moulding was knackered and the fuselage very badly warped.

Thankfully I found an older boxing of the Blenheim a few days ago for a good price on fleabay, and picked it up. Granted it might have helped sway my decision to pick this up again this morning – but I do think it was a bit of a coincidence. I’ve also had sitting on my shelf for a few years a corrected nose set for the Fairey Battle which will also be used.

As I’ve already built the Hurricane, I’m going to build an old toll Airfix Boulton-Paul Defiant in its place – mainly because I also have the correct nose kit for that too and it’d be rude not to.

Image

I'm looking forward to getting on with this - I've never actually finished a Twin and it'd be nice to get some more interesting types into my RAF collection.

Apologies for the waffle :bag:

Cheers

Stuart
Stuart Templeton 'I may not be good but I'm slow...'
User avatar
Stuart
Elite Member
Posts: 11907
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales

Re: Airfix VC Icons set

Post by Stuart »

I picked up the Hampden first today, and mainly spent the time I had after sorting out my toolbox and seeing where I’d got too (not very far) and how everything fits together.

This is how it stands at present – lots of lovely rivets!

Image

Image

I think I can do more with this and add a bit of detail and repaint – I’m in no rush to finish so I can take my time.

Onwards and upwards - it's nice to be moulding at lunch again - I'm glad my Mojo's on it's way back. :grin:

Cheers

Stuart
Stuart Templeton 'I may not be good but I'm slow...'
User avatar
Stuart
Elite Member
Posts: 11907
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales

Re: Airfix VC Icons set

Post by Stuart »

This is the Hurricane - finished back in 2013!!!

I'll take some better pictures when I do the final shots, and give you some background on th Pilot.

Image

Image

Image

Actually I'm glad I finshed this way back when - it'll be nice to see if anythign in my modelling has improved in three years!

Cheers

Stuart
Stuart Templeton 'I may not be good but I'm slow...'
User avatar
LyleW
Admin
Posts: 15035
Joined: Fri Dec 13, 2013 7:25 am
Location: Mt. Washington KY

Re: Airfix VC Icons set

Post by LyleW »

Neat stuff, Stuart! Can't wait to see more.
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
User avatar
BorgR3mc0
Elite Member
Posts: 3311
Joined: Tue Mar 18, 2014 7:16 am
Location: Utereg

Re: Airfix VC Icons set

Post by BorgR3mc0 »

Image


VC recipients, now there is an interesting subject.

Also modelling on your lunch break in the car, sounds like a diffcult thing to do. Do you put your tray on your knees?
ImageImageImageImageImage
User avatar
Stuart
Elite Member
Posts: 11907
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales

Re: Airfix VC Icons set

Post by Stuart »

Thanks Gents - it'll certainly make an interesting project.

Borg - that's about it - I sit in the back with my modelling tray/workstation on my knees and my tool/materials in a tool box next to me. I've been doing it for years and it seems to work well. The light is certainly very good.
Stuart Templeton 'I may not be good but I'm slow...'
User avatar
BlackSheep214
Elite Member
Posts: 13417
Joined: Sun Apr 06, 2014 8:47 pm

Re: Airfix VC Icons set

Post by BlackSheep214 »

You need to upgrade to a minivan or an RV instead. LOL!
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
CallSignOWL
Addicted Member
Posts: 1754
Joined: Mon Apr 07, 2014 12:45 pm

Re: Airfix VC Icons set

Post by CallSignOWL »

portman wrote:Thanks Gents - it'll certainly make an interesting project.

Borg - that's about it - I sit in the back with my modelling tray/workstation on my knees and my tool/materials in a tool box next to me. I've been doing it for years and it seems to work well. The light is certainly very good.
Modeling on a lunch break? Why didn't I think of that!? Lol :P

Nice work on that hurricane. These old kits are a blank slate, just crying out for some scratch building! :popcorn:
Every take-off has a landing...some are just better than others
User avatar
Paul
Addicted Member
Posts: 1069
Joined: Mon Mar 17, 2014 9:09 am
Location: Under your bed, muwahahahaha

Re: Airfix VC Icons set

Post by Paul »

This is going to be grand, Stuart
Image
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: Airfix VC Icons set

Post by KSaarni »

What a great project Stuart!

The Hurricane looks as it would have been built "yesterday"

Looking forward to the Hampden, a sort of ugly looking plane, but still so cool!

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
Post Reply

Return to “Aircraft Work in Progress”