1/48 Hasegawa Arado 234 Blitz-Now In Completed Section

Post your work in progress of your aircraft builds in here.
User avatar
mustang1989
Moderator
Posts: 5035
Joined: Tue Mar 18, 2014 8:35 pm

Re: 1/48 Hasegawa Arado 234 Blitz-Landing Gear-10/18

Post by mustang1989 »

Thanks Tojo. Let's just hope I can get it all installed without messing it up. lol

I got the fuselage together and the camera upper and lower fuselage clear panels glued into place as of last week. This weeks progress so far has seen the installation of the wings. The body work is immense but nothing compared to what I'm going through with my VW Bus at this point. Posted below is the progress so far with the problematic seams noted in red. Lots of filling and sanding in all four areas.......

Image
User avatar
Stikpusher
Moderator
Posts: 21189
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: 1/48 Hasegawa Arado 234 Blitz-Progress-10/24

Post by Stikpusher »

:popcorn: Good stuff! Keep the progress reports coming!
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Duke Maddog
Elite Member
Posts: 7669
Joined: Tue Jun 03, 2014 11:22 am
Location: Rowland Heights, CA

Re: 1/48 Hasegawa Arado 234 Blitz-Progress-10/24

Post by Duke Maddog »

Looking great so far! After all the practice sanding and filling on the panel van and the VW, you should have this smooth in no time! LOL!
The Duke
Virtuoso of Miniatures

"Do you know what the chain of command is? It's the chain I get and beat you with 'till you understand who's in ruttin' command!"
-Jayne Cobb, Firefly Episode 2 "The Train Job"

We are modelers - the same in spirit, in hunger to insanely buy newly released kits, hustlers in hiding our stash from our better halves and experts in using garbage as replacements for after-market parts.
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: 1/48 Hasegawa Arado 234 Blitz-Progress-10/24

Post by KSaarni »

Looking good Joe !

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
mustang1989
Moderator
Posts: 5035
Joined: Tue Mar 18, 2014 8:35 pm

Re: 1/48 Hasegawa Arado 234 Blitz-Progress-10/24

Post by mustang1989 »

Thanks for the supportive comments fellas. Mark...............smooth yes............re-riveted......yuk!! I broke out the pin vise this morning to restore all of the rivet detail that got sanded away at the front part of the fuselage. I've still got the section behind and on the sides of the fuselage at the wing root to go and that's not to mention re-applying the panel lines that are gone as well. Here's 45 minutes worth of sanding and re-riveting:

Image
User avatar
Paul
Addicted Member
Posts: 1069
Joined: Mon Mar 17, 2014 9:09 am
Location: Under your bed, muwahahahaha

Re: 1/48 Hasegawa Arado 234 Blitz-Progress-10/25

Post by Paul »

Looks fine to me. Now for a good buffing.
Image
User avatar
Stikpusher
Moderator
Posts: 21189
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: 1/48 Hasegawa Arado 234 Blitz-Progress-10/25

Post by Stikpusher »

:shoutout:


Whats up next? :Beaver:
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Duke Maddog
Elite Member
Posts: 7669
Joined: Tue Jun 03, 2014 11:22 am
Location: Rowland Heights, CA

Re: 1/48 Hasegawa Arado 234 Blitz-Progress-10/25

Post by Duke Maddog »

Well done! It may have been a long time, but that's the difference between a good model and a great model. Rock on man!
The Duke
Virtuoso of Miniatures

"Do you know what the chain of command is? It's the chain I get and beat you with 'till you understand who's in ruttin' command!"
-Jayne Cobb, Firefly Episode 2 "The Train Job"

We are modelers - the same in spirit, in hunger to insanely buy newly released kits, hustlers in hiding our stash from our better halves and experts in using garbage as replacements for after-market parts.
User avatar
mustang1989
Moderator
Posts: 5035
Joined: Tue Mar 18, 2014 8:35 pm

Re: 1/48 Hasegawa Arado 234 Blitz-Progress-10/25

Post by mustang1989 »

Stikpusher wrote::shoutout:


Whats up next? :Beaver:
Thanks Carlos. A lot more body work as far as sanded off riveting and panel lines are concerned I'm afraid. I'm working on the canopy section so I can get that all behind me and I'm trying to hold off on the engine pod and the resin engine so I can build the Small Block Chevy for my VW Bus and the Jumo 004 at the same time.
User avatar
mustang1989
Moderator
Posts: 5035
Joined: Tue Mar 18, 2014 8:35 pm

Re: 1/48 Hasegawa Arado 234 Blitz-Progress-10/25

Post by mustang1989 »

Duke Maddog wrote:Well done! It may have been a long time, but that's the difference between a good model and a great model. Rock on man!
Thanks Mark. Hopefully I can keep the trend up. lol
Post Reply

Return to “Aircraft Work in Progress”