Indeed there was a noticeable gap between the fuselage and the engine:
http://www.warbirdsresourcegroup.org/LR ... u87d-1.jpg
1/48 Hasegawa Ju 87B-2 (FINISHED)
-
lawdog114
- Master Member
- Posts: 534
- Joined: Tue May 20, 2014 11:46 pm
- Location: Olmsted Township, Ohio
Re: 1/48 Hasegawa Ju 87B-2 (Work in Progress)
Doh!..Thomas_M wrote:Indeed there was a noticeable gap between the fuselage and the engine:
http://www.warbirdsresourcegroup.org/LR ... u87d-1.jpg
Can you fly this plane and land it? Surely you can't be serious? I am serious, and don't call me Shirley
Re: 1/48 Hasegawa Ju 87B-2 (Work in Progress)
lawdog114 wrote:Doh!..Thomas_M wrote:Indeed there was a noticeable gap between the fuselage and the engine:
http://www.warbirdsresourcegroup.org/LR ... u87d-1.jpg
Sorry, I shouldn't laugh
You painting is absolutely stunning
-
lawdog114
- Master Member
- Posts: 534
- Joined: Tue May 20, 2014 11:46 pm
- Location: Olmsted Township, Ohio
Re: 1/48 Hasegawa Ju 87B-2 (FINISHED)
I finished this one the other night. For those who have not seen this turkey, it's the 1/48 Hasegawa Ju-87 B-2 in the markings of 3/StG 2 in August of 1940, at the height of the Battle of Britain. Three Guys Replicas provided the markings. My research said that on August 16th 1940, T6+HL attacked Tangmere and was on the losing end of a fight with a 601 Squadron Hurricane. T6+HL then made an emergency landing near Chichester-Selsey Road in Sussex. From what I understand, Pilot Uffz. Ernst König and radio operator Uffz. Josef Schmid were wounded and subsequently POW'ed. There's some evidence this was actually a B-1, but I decided not to drive myself crazy over the matter and just trust that Three Guys got it right. This is one of those good enough for me scenarios.
Reference the kit, I thought it was good. Most mishaps were my own doing, such as the broken mast when I was trying to rig the aerial wire (look close). I didn't like the flap hinges that were misrepresented as blobs (which I didn't mess with) or the way the front cowl fit, which had a gap. Photo evidence now showed the gap is supposed to be there (Thank you Thomas)...maybe next time. I enhanced the kit with Ultracast exhausts, Quickboost guns and seats, then finally True Details tires. I kept weathering to a minimum, such as some minor exhaust soot and wing root chipping. I figured this one wasn't in service long enough to get dinged up too bad.
Thanks for following and comments are appreciated and welcome.
Joe







Apparently T6+HL clean spats and was sans the "Jericho Trumpet", but I just could not resist building a Battle of Britain Stuka without one.

Reference the kit, I thought it was good. Most mishaps were my own doing, such as the broken mast when I was trying to rig the aerial wire (look close). I didn't like the flap hinges that were misrepresented as blobs (which I didn't mess with) or the way the front cowl fit, which had a gap. Photo evidence now showed the gap is supposed to be there (Thank you Thomas)...maybe next time. I enhanced the kit with Ultracast exhausts, Quickboost guns and seats, then finally True Details tires. I kept weathering to a minimum, such as some minor exhaust soot and wing root chipping. I figured this one wasn't in service long enough to get dinged up too bad.
Thanks for following and comments are appreciated and welcome.
Joe







Apparently T6+HL clean spats and was sans the "Jericho Trumpet", but I just could not resist building a Battle of Britain Stuka without one.

Can you fly this plane and land it? Surely you can't be serious? I am serious, and don't call me Shirley
Re: 1/48 Hasegawa Ju 87B-2 (FINISHED)
Shirley, this is a great build!
To make each build less crappy than the last one. Or, put another way, "Better than the last one, not as good as the next one!"..
Re: 1/48 Hasegawa Ju 87B-2 (FINISHED)
Very nice indeed. I really like your weathering style.
Forgive me if you've already stated it but what paints were used for the main colors?
Forgive me if you've already stated it but what paints were used for the main colors?
It's up to you how much money you want to spend and how many new words you want to create "correcting" something.
-
lawdog114
- Master Member
- Posts: 534
- Joined: Tue May 20, 2014 11:46 pm
- Location: Olmsted Township, Ohio
Re: 1/48 Hasegawa Ju 87B-2 (FINISHED)
Thanks for the compliments folks. The underside RLM 65 is half Tamiya XF-23 Light blue and half XF-2 Flat White, The top RLM 71 and 70 are Gunze Aqueous. I added XF-57 Buff to both to create the streaking.Adam wrote:Very nice indeed. I really like your weathering style.
Forgive me if you've already stated it but what paints were used for the main colors?
Joe
Can you fly this plane and land it? Surely you can't be serious? I am serious, and don't call me Shirley
- Thomas_M
- Admin
- Posts: 4244
- Joined: Fri Dec 13, 2013 9:43 am
- Location: Bad Wurzach - Germany
- Contact:
Re: 1/48 Hasegawa Ju 87B-2 (FINISHED)
Joe, this is just beautiful! You did a fine job on this one! I like the overall finish and the base. Going to have this one on our Facebook site soon!




