Airfix 1/32 Ordnance QF 17 Pounder

Here is the place to show of your finished armor products.
User avatar
Stikpusher
Moderator
Posts: 21180
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Airfix 1/32 Ordnance QF 17 Pounder

Post by Stikpusher »

This is Airfix’s 1980 vintage 1/32 17 Pounder AT gun. They re issued it in 2017 so I grabbed it from a LHS. I had tried to buy one on eBay for years, but they always ended up costing more than I was willing to bid. Overall it’s a nice kit, but the instructions are a bit ambiguous on the placement of many of the small parts on the carriage and breech area. Make sure that you have good photo references if you plan on building this kit. I black based the model and painted it in a mix of Tamiya colors for British Olive Drab SCC 15. I added a few tie down straps from painted Tamiya tape for the tow ropes and shovel. I used Mig pigments for weathering.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

They liked it at OC IPMS this past Friday.

Image

I am still planning to build a Bronco figures crew set and a different stand for this kit in the near future. The kit included multi pose figures do not quite work without some surgery.

Thanks for looking, comments and critiques welcome.
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Floki
Elite Member
Posts: 3548
Joined: Wed Dec 12, 2018 2:23 am
Location: Muncie, Indiana

Re: Airfix 1/32 Ordnance QF 17 Pounder

Post by Floki »

Black basing was defiantly the way to go on this it turned out very well congratulations on 2nd place.
March as one, Don't look back
Odin's sons... Attack!
Unleash hell! Do not repent! Warfare grants us no lament
Let your weapons slash and tear This is no place for fear
Hold the lines! Move as one! In unity our victory's won
Our shields will form a mighty wall
United we shall never fall
User avatar
Stikpusher
Moderator
Posts: 21180
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: Airfix 1/32 Ordnance QF 17 Pounder

Post by Stikpusher »

Thanks Clint. I’m slowly getting the hang of black basing. Reduces the need for pin washes on monotone schemes. All I did on this one was some dry brushing after the Green was painted on.
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
BorgR3mc0
Elite Member
Posts: 3311
Joined: Tue Mar 18, 2014 7:16 am
Location: Utereg

Re: Airfix 1/32 Ordnance QF 17 Pounder

Post by BorgR3mc0 »

Great work on an old kit! Well deserved award!
ImageImageImageImageImage
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: Airfix 1/32 Ordnance QF 17 Pounder

Post by KSaarni »

Fantastic work and a fantastic result!
The figure looks great!

The winner must have been "out of this world" or then the judges were bribed !

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: Airfix 1/32 Ordnance QF 17 Pounder

Post by KSaarni »

for some reason my post was doubled, cannot delete, so i Edited.

Once more Carlos, well done!

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
Stikpusher
Moderator
Posts: 21180
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: Airfix 1/32 Ordnance QF 17 Pounder

Post by Stikpusher »

Borg & Kari, thank you for looking in and your kind comments.

Kari, the model that took first place was pretty nice as well. Mine had a few things to knock it down a notch.

Here’s a link to out club page on the monthly meetings, photos, etc. You’ll see out own Duke Maddog there...

http://www.ipmsoc.org/category/monthly-meeting-news/
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: Airfix 1/32 Ordnance QF 17 Pounder

Post by KSaarni »

Thanks Carlos sharing this, very intersting with a bunch of nice builds as well!
Wouh, this is really an active and visually informative club!


- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
Stikpusher
Moderator
Posts: 21180
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: Airfix 1/32 Ordnance QF 17 Pounder

Post by Stikpusher »

Kari, Mark recruited me into that group 12 years ago. Probably the best move modeling wise that I have ever made. There is so much to learn from these guys and my skills have improved big time after talking with them face to face. The masters in the club are more than happy to share their methods and give pointers. I’m glad that you enjoyed your virtual visit.
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Duke Maddog
Elite Member
Posts: 7668
Joined: Tue Jun 03, 2014 11:22 am
Location: Rowland Heights, CA

Re: Airfix 1/32 Ordnance QF 17 Pounder

Post by Duke Maddog »

Carlos that did look magnificent in person! Way to go! Congrats on the well deserved second place.


Kari, it is a really fun group that does so much. I'm also glad you enjoyed your virtual visit.
The Duke
Virtuoso of Miniatures

"Do you know what the chain of command is? It's the chain I get and beat you with 'till you understand who's in ruttin' command!"
-Jayne Cobb, Firefly Episode 2 "The Train Job"

We are modelers - the same in spirit, in hunger to insanely buy newly released kits, hustlers in hiding our stash from our better halves and experts in using garbage as replacements for after-market parts.
Post Reply

Return to “Completed Builds: Armor”