Page 7 of 16
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 1:11 pm
by Stikpusher
The tadpole head may be due to the fact of not gun firing thru the hub of the 410’s prop, unlike on the 109. Which then leads me to wonder if they shared a common spinner cover, and a blanking plate was put in place of the muzzle opening on the 410....
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 1:17 pm
by Stuart
Thankfully I've not yet had to do this...
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 1:17 pm
by speedgraflex
That explains a lot, Carlos! What a great photo! What I have is this... which is “weak tea” compared to your image.
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 1:19 pm
by speedgraflex
portman wrote:Thankfully I've not yet had to do this...
I am going in there, Stuart! I’ll be the Guinea Pig.
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 1:21 pm
by Stuart
Well when this turns up I'll be following...
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 1:31 pm
by Paul
A grand looking effort, Bruce. As far as the spirals go I have done both the decal and the tape method. Just for info, Eduard used to make spinner spiral masks as well as Maketar. I used to have a video on how to do them also but like my memory that has seemed to have faded into oblivion.
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 1:36 pm
by speedgraflex
Stuart!! Oh... yes! Yes! I tried to find one of those, but prices are high for MB! A better engine shape, too. Proof that CAD designs do not always lead to greater accuracy. Those MB molds are apparently “finer,” than Fine Molds when it comes to the overall shape. Looking forward very much!!!!
Paul, Thanks so much! I sincerely appreciate the advice about checking out Eduard masks for spinner spirals.
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 1:38 pm
by speedgraflex
John! Thank you so much for posting your images of spirals—I think I am going to adapt as much of your process as possible to mask and paint these spirals!
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 2:03 pm
by Fermis
Great subject!!!
I really enjoyed building this kit (last year)...added a couple more to the stash as well!!!
Glad I didn't have to mess with those pesky spinner spirals!
When I do have to do spirals...I use Eduard masks. I bought 2 sets. They say they're for the 190, but there is quite a variety, and there's one for about every spiral you could want. I've used em in 1/48 and 1/72. I have even re-used several of them, several times.
Re: FM 1/72 Me 410A-1, IIZG26, Gelbe Sieben, Werl, Germany 1
Posted: Sat May 18, 2019 3:13 pm
by Floki
I've been wanting to try and make my own masks for the spiral but have always just ended up using decals, maybe for the next build.