CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Show off your completed work! One or two pictures and a brief explanation. Let others have a quick look at your finished masterpieces!
User avatar
cbaltrin
Addicted Member
Posts: 1593
Joined: Mon Dec 26, 2022 9:10 pm
Location: Detroit

CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by cbaltrin »

I'm rolling out a Rufe! I present to you my Tamiya A6M2-N. My original thought was to do a war weary or even crashed aircraft abandoned on some south pacific island, so I beat this one up pretty bad. However, after the die was cast, I realized I had never done a diorama let alone one that involves water. So, I just decided to practice my chipping and weather techniques ... :whistle: Now I realize a plane that lands and takes off from water would probably not get this beat up, but it was a $12 model and I wanted to play around and have some fun. Also, the instructions say this particular a/c was in service from 1942 to 1944 . If that can be believed, I think an a/c that served in theatre for 3 years can be excused from showing some wear and tear. Now I debated whether or not I should beat up the meat balls, but I heard somewhere that the national insignia on j-aircraft represent the emperor and were re-touched often (good enough for me). I did try to simulate this by painted over them with Tamiya Flat Red, but the effect all but disappeared after flat coating it -- so much for that idea. So hear it is. Hope you like. Just made a few modifications. Scratch build new cowl guns and added seat belts and a clear lens for the gunsight.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Big Joe: 'You just keep those Tigers busy and we'll take care of the rest.'
Oddball: 'The only way I got to keep them Tigers busy is to let them shoot holes in me...'

My Stash https://www.scalemates.com/profiles/mat ... 53&p=stash
User avatar
BlackSheep214
Elite Member
Posts: 13409
Joined: Sun Apr 06, 2014 8:47 pm

Re: CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by BlackSheep214 »

Looks good to me whether you think it’s correct or not as far as chipping goes. Looks like a war weary bird.
“Who controls the skies, controls the fate of this Earth”

Author unknown- 352nd Fighter Group, Blue-Nosed Bastards of Bodney

“Send one plane it’s a sortie; send two planes it’s a flight; send four planes it’s a test of airpower. - Richard Kohn
User avatar
Stikpusher
Moderator
Posts: 21180
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by Stikpusher »

Very sharp work Chris! :shoutout:
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
tempestjohnny
Elite Member
Posts: 3804
Joined: Sat Oct 15, 2016 4:51 am
Location: Naples. FL

Re: CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by tempestjohnny »

I think it looks great. Saltwater can do a number on aircraft that land on it regularly. Your weathering looks right for 3 year old warbird
User avatar
Ceaser_Sa1ad
Master Member
Posts: 916
Joined: Tue Aug 31, 2021 1:23 pm
Location: Ontario

Re: CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by Ceaser_Sa1ad »

Nice! Looks good
"In this galaxy there's a mathematical probability of three million Earth type planets. And in all of the universe, three million million galaxies like this. And in all of that... and perhaps more... only one of each of us." - McCoy
User avatar
Gary Brantley
Elite Member
Posts: 2738
Joined: Tue Apr 08, 2014 9:40 pm
Location: Cameron, Texas

Re: CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by Gary Brantley »

Wow! That looks great, Chris! :shoutout: Your weathering work is so well done; man, that looks cool! :bow:
User avatar
cbaltrin
Addicted Member
Posts: 1593
Joined: Mon Dec 26, 2022 9:10 pm
Location: Detroit

Re: CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by cbaltrin »

Thank you gentlemen for the kind words. Been wanting a Rufe on my shelf for years and this was actually my 3rd go at it. I actually just threw away a half built Hasegawa Rufe last year. :bag:
Big Joe: 'You just keep those Tigers busy and we'll take care of the rest.'
Oddball: 'The only way I got to keep them Tigers busy is to let them shoot holes in me...'

My Stash https://www.scalemates.com/profiles/mat ... 53&p=stash
User avatar
keavdog
Elite Member
Posts: 4778
Joined: Thu Jan 10, 2019 1:14 am
Location: Earth

Re: CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by keavdog »

Very nice Chris. I really like the worn look. Love the Rufe and have built two of those Tamiya kits myself - though both in IJN gray. Hmmm... maybe do another in green like yours :hmm:
Well done.
Thanks,
John
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by KSaarni »

Fantastic build!

I don’t think it is at all ”too” worn, just right!

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
cbaltrin
Addicted Member
Posts: 1593
Joined: Mon Dec 26, 2022 9:10 pm
Location: Detroit

Re: CB's A6M2-N Type 2 Floatplane Fighter -- (Tamiya 1/48 Rufe)

Post by cbaltrin »

keavdog wrote: Sun Sep 08, 2024 1:34 pm Very nice Chris. I really like the worn look. Love the Rufe and have built two of those Tamiya kits myself - though both in IJN gray. Hmmm... maybe do another in green like yours :hmm:
Well done.
Thank you John. I don't often chip a model like this but I do like the look on a green j-aircraft. Will probably do this again on my next one.

KSaarni wrote: Sun Sep 08, 2024 2:05 pm Fantastic build!

I don’t think it is at all ”too” worn, just right!

- Kari
Thank you Kari !
Big Joe: 'You just keep those Tigers busy and we'll take care of the rest.'
Oddball: 'The only way I got to keep them Tigers busy is to let them shoot holes in me...'

My Stash https://www.scalemates.com/profiles/mat ... 53&p=stash
Post Reply

Return to “Member's Gallery”