1/48 AMT P-51D

Post your work in progress of your aircraft builds in here.
Post Reply
User avatar
Stikpusher
Moderator
Posts: 21183
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: 1/48 AMT P-51D

Post by Stikpusher »

Since it has roughly been a week since I posted my last photo update, I figured that I better get back on it. Over the past week I scribed in lost panel line and rivet detail that was removed during seam filling/clean up

Image

Image

then I masked off the canopy and glued it on place prior to airbrushing black onto the framework prior to the NMF exterior, so black will show from the inside. I also added the gunsight into its' proper location, but I forgot to get a photo of that before I installed the canopy

Image

Image

Next up is masking off the anti glare strip, then painting the fuselage BMF areas with AK Real Colors Aluminum...
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Stuart
Elite Member
Posts: 11907
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales

Re: 1/48 AMT P-51D

Post by Stuart »

Nice to see this still progressing Carlos!
Stuart Templeton 'I may not be good but I'm slow...'
User avatar
Stikpusher
Moderator
Posts: 21183
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: 1/48 AMT P-51D

Post by Stikpusher »

Stuart wrote: Fri Apr 25, 2025 12:10 pm Nice to see this still progressing Carlos!
Thanks Stuart! It’s starting to take proper shape now… just wait for the next update :whistle:
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Stikpusher
Moderator
Posts: 21183
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: 1/48 AMT P-51D

Post by Stikpusher »

So yesterday morning I airbrushed on a coat of AK Real Colors Aluminum onto the fuselage

Image

then in the evening I glued the wings in place and the radiator intake scoop on the belly

Image

Image

Thanks to a good rubber band during the gluing process, there is not much gap at the wing root compared to the test fittings, so gap filling and seam clean up should go quickly. And then today, my decals came in the mail. I chose these markings from one of the P-51s flown in the movie Empire of the Sun, "Missy Wong from Hong Kong"

Image

Image

more to come in a few days...
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
KSaarni
Elite Member
Posts: 5621
Joined: Sun Apr 06, 2014 7:13 am
Location: Gent, Belgium
Contact:

Re: 1/48 AMT P-51D

Post by KSaarni »

Looking good!

Interesting subject! I googled a little bit about the "Missy Wong from Hong Kong" and very interesting information.

https://www.mustangsmustangs.com/p-51/s ... al/A68-192

It crashed 2011, luckily the pilot could eject but the Mustang was destroyed

Image

So indeed, very special project you have found Carlos !

- Kari
---
On the bench:

MiniArt 1:48 - Junkers F13 Float Plane



https://www.facebook.com/GrundAsk-Scale ... 721218708/
User avatar
Stikpusher
Moderator
Posts: 21183
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: 1/48 AMT P-51D

Post by Stikpusher »

Oh wow! :shocked: Thanks for that Kari! I was curious as to the history of the airframe itself. :hmm: Good to see that her last pilot was able to bail out and not auger in. Now we can see the whole tale. A Korean War vet apparently. Nice!

Here are a couple photos of her in Hollywood make up for Empire of the Sun

Image

Image
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Stikpusher
Moderator
Posts: 21183
Joined: Sat Apr 05, 2014 8:37 pm
Location: Ceti Alpha 5

Re: 1/48 AMT P-51D

Post by Stikpusher »

So I have been working on this over the past couple of weeks since my last update...

first up I did the seam filling and then sanding at the wing roots

Image

Image

the touch up painting on those areas got screwed up a couple of times due to my rushing of things... so over the past couple of days I fixed that up... after also adding the horizontal stabilizers and paint the fabric control surfaces in a different shade of aluminum.

Image

Image

I've also completed some other sub assemblies such as the landing gear, propeller, etc, but will get those in the next photos with the airframe. For now its pretty much ready for decals...
"Surely I have made my meaning plain? I intend to avenge myself upon you, Admiral. I have deprived your ship of power, and when I swing 'round, I intend to deprive you of your life."

FLSM
User avatar
Stuart
Elite Member
Posts: 11907
Joined: Sun Apr 06, 2014 1:06 pm
Location: North Wales

Re: 1/48 AMT P-51D

Post by Stuart »

Looking very nice indeed Carlos!
Stuart Templeton 'I may not be good but I'm slow...'
User avatar
Gary Brantley
Elite Member
Posts: 2738
Joined: Tue Apr 08, 2014 9:40 pm
Location: Cameron, Texas

Re: 1/48 AMT P-51D

Post by Gary Brantley »

Very sharp, Carlos! :bow:
User avatar
Medicman71
Elite Member
Posts: 11299
Joined: Mon Apr 07, 2014 9:32 am
Location: Houston, Tx

Re: 1/48 AMT P-51D

Post by Medicman71 »

Very nice!
Mike

Sponsored by Boeing, Lockheed Martin, Northrop Grumman, Saab, BAE, and Dassault
Post Reply

Return to “Aircraft Work in Progress”